User's Manual

12A–Audio Jack, Left (white), input from source AV equipment.
12B–Audio Jack, Left (white), output to TV.
IR Remote Controller
1 CATV/AV : For switching Video signal and cable TV channels
2 CH + / CH - : For paging up and down through the cable TV Channels
3 SEARCH : Automatic search tuning for cable TV and memorize it
4 MUTE : Silent
5 DISPLAY : Displays the selected mode : Channel number or AV
6 RETURN : Switching back to the channel last selected
7 NUMBER BUTTONS : TV channel selection
3.1 To enjoy a life of wireless video and audio, just connect the transmitter to any
A/V source you like and CATV cable, and connect the receiver to a TV,
monitor or speaker in another location.
□ Transmitter
□ Receiver
CH +
CH -
CATV/AV
NUMBER BUTTONS
SEARCH
MUTE
DIAPLAY
RETURN
NOTE: Make sure the ON/OFF switch is in the
「OFF」position before connection
3. Setup Guide
1.
Connect one end of the RCA cable to the
audio and video jack
s, and connect the other
end to a source device via its “AV output”.
2. Connect the CATV cable to the Cable IN jack.
3.
Connect the DC plug of the adapter to the DC
jack, and connect the power supply to an
outlet.
4.
Fix IR mouse next to or in front of IR sensor
of
source device, or alternatively have
transmitter
facing directly toward the source
1.
Connect one end of the RCA cable to the
audio and video jacks and connect the
other end to a TV (or monitor, speakers)
via its “AV input”.
2.
Connect the DC plug of the adapter to the
DC jack, and connect the power supply to
an outlet.
3. Keep the IR window oriented toward
front when using your
source device
remote controller.