User's Manual

sDAS
+
User Manual
9
3. Plug the single mode fiber with LC/APC connector into HEU “RAU 1 UL” and
RAU “UL” fiber port.
4. Plug the single mode fiber with LC/APC connector into HEU “RAU 1 DL” and
RAU “DL” fiber port.
5. Connect RAU RJ45 port to PoE “Data & Power Out” port
6. RAU “Fiber” LED should start flashing green if HEU turned on, fiber properly
connected, and the optical loss is within acceptable range.
7. Now, sDAS+ is ready for system provisioning