User Manual

4
Chapter 1. General Information
1.1 Module Features and Specifications
PLC100 PLC200
Input Frequency
22~34 MHz 12~42 MHz
Output
Frequency
2170~2182MHz
2500~2530MHz
Output 1 dB
Compression
Point
24dBm Typ. 24dBm Typ.
Output
Transmitting
Noise
-122dBm/Hz Max
-116dBm/Hz Max
Output Spurious
(+22dBm TX Out)
-60dBc Max -60dBc Max
Output Power
Blanking
Threshold
-40dBm± 1dB
-40dBm± 1dB
TX Switching
Latency
<1.2uS <1.2uS
LO Stability
± 10kHz
± 10kHz
Phase Noise
<- 65 dBc/Hz @100Hz
-85 dBc/Hz @lKHz
-90 dBc/Hz@10kHz
-95 dBc/Hz@100kHz
<- 65 dBc/Hz @100Hz
-85 dBc/Hz @lKHz
-90 dBc/Hz@10kHz
-95 dBc/Hz@100kHz
Input and Output
Return Loss
6.0dB min 6.0dB min
Input Impedance
F-type 75 ohms F-type 75 ohms
Output
Impedance
Dipole or N-type 50
ohms
Dipole or N-type 50
ohms
Supply Voltage
+15VDC to +24VDC +15VDC to +24VDC
Supply Current
350 mA max 350 mA max
Temperature
-10 ~ +70
-10 ~ +70
Humidity
100% weatherproof 100% weatherproof
Lightning &
Surge Protection
Meets IEEE
specifications
Meets IEEE
specifications
Note: Typical value @25, unless otherwise specified. Technical specifications are
subject to change without prior notice.