User's Manual

1. Please press the Scan button. Users have to pull the combo box to see

all the com port resources available. This "scan" feature is to shorten the

searching scope. But still you have to go to the MS Windows' device

manager to find out the Virtual Com Port number of iBT-GPS data logger

(check Virtual Com Port number of iBT-GPS data logger).

2. Select correct Port and set BaudRate at a fixed 115200. Click on

“Connect” to build a connection. GPS status in the “SATELLITE

INFORMATION” section will start to show when you click on it.

Note: Plug in the USB cable to connect your PC and iBT-GPS in advance.

3. To stop connection anytime, just click on “Disconnect”.