User Manual

Step 2 Turn on the power switch

Before After

- To turn on the power, please click and hold for 1 second, then you can see the

blue LED and orange LED turning on.

- To turn off the power, please click and hold for 3 seconds, then you can see the

blue LED and red LED blinking 3 times.

Step 3 Connecting your handheld device with iBT-GPS

Please refer to the user manual of PDA to enable the Bluetooth

connectivity. If the connection between your device and iBT-GPS is

successful, the blue LED of iBT-GPS will be blinking.

Below, we provide a common procedure of software installation to set up

your PDA. (For other PDA, the steps may be a little bit different.

Bluetooth Manager is one of popular program used for Bluetooth device.)