User's Manual

Chapter 2 Getting started

Please follow the procedure step by step.

Step 1 Charging Your Battery

For the first time you use the iBT-GPS, please charge battery until it is

full (the green LED blinks). Take the power cable and connect it to the

power jack (mini USB type). This will begin to charge the battery. The

LED that represents the battery is the left-most battery icon (shown in

below).

- If the LED is red, that means battery power is critically low. Charge immediately.

- If the LED is green, that means battery is charging now.

- If the green LED blinks, that means battery is fully charged.