User's Manual

7
Chapter 2 Getting started
Please follow the procedure step by step.
Step 1 Charging Your Battery
For the 1
st
time you use the CBTGPS, please charge battery until it is full
(the LED turns off). Take the power cable and connect it to the power
jack (mini USB type). This will begin to charge the battery. The LED that
represents the battery is the right-most battery icon (shown in below).
- If the LED is red, that means battery power is critically low. Charge immediately.
- If the LED is green, that means battery is charging now.
- If the LED is off, that means battery is fully charged. Besides, if the battery still
has energy over 80% of the total capability, the LED is off, too. This is to make
the battery life longer, CBTGPS won’t charge itself.