User's Manual

3
Chapter 1. General Information
1.1 Module Features and Specifications
Category Parameter Description
RF frequency 2500 ~ 2624 MHz
IF frequency 152 ~ 276 MHz
Gain
30 ± 2dB
0.3 dB/6 MHz
Noise Figure 5.5 dB typ / 9.0 dB max
Output 3rd Intercept 24 dBm
PCS Rejection > 90 dB
2.3G WCS Rejection > 90 dB
Image Rejection
(add gain)
> 80 dB
IF Rejection > 80 dB
Downstream
In-band Spurious < -80 dBm
IF Input 12 ~ 42 MHz
RF Output 2657 ~ 2690 MHz
Gain 24 ± 2 dB
Output 1-dB Compression Point +25 dBm typical
Output Transmit Noise
-120 dBm/Hz typical
-118 dBm/Hzm ax
Output Spurious
@+22 dBm Tx output
-60 dBc
( in-band and out-band )
Output Power Blanking Threshold -45 dBm @ IF input
Upstream
TX Switch Latency < 1.2 micro second
Phase Noise
-84dBc/Hz @ 1KHz
-88 dBc/Hz @ 10 KHz
-96 dBc/Hz @ 100 KHz
LO Leakage at RF / IF ports -50 dBm Max.
LO Frequency
Downstream : 2348 MHz
Upstream : 297MHz,2348MHz
General
LO Stability ± 10 KHz over temp.
Other feature:
1. lightning protection Ok
2. surge protection Ok
3. Transceiver sleep mode Ok
Note: Typical value @25℃, unless otherwise specified. Technical specifications are
subject to change without prior notice.