TWS Wireless EarBuds Model: TW93 User Manual
Overview Chose eartips Large Medium Medium eartips fit for most of the people, recommend to try if for the first time.
Start to Using First use Take out both 2 earbuds then re-insert them back into the case to activate the earphones. Notes:If Earbuds fail to be charged,please charge the case via USB cable(for details, please refer the following step) How to pair 1.Activating the EarBuds. 2.Take out the EarBuds from the case, they willauto power on and pair with each other. 3.The LED light on one earplug will be turned off, the other earplug will automatically go into pairing mode. 4.
Please try the following steps if fail to connect with the mobile device. 1.Turn off the two EarBuds first. 2.Tap the multi-function buttons for 10s(LED will blinkred and white light then turn off). 3. The two Earbuds will be put into the charging case to activate, and take out the EarBuds from the caseat the same time, they will be automatically matched 4.The LED light on one earplug will be turned off, the other earplug will automatically go into pairing mode. 5.
Charging Charging the Earbuds Insert the EarBuds into the charging case(pogo pins should be well-connected)LED light will be Red while charging and turnsinto White( will be last for 60s) once full charged . Charging the Case The charging case supports wireless charging function (Compatible with Huawei, Samsung, Xiaomi and other QI-certified wireless transmitters.
Functions Power-On Method 1: Take out the EarBuds from the chargingcase,it will auto power on. Method 2: Tap the multi-function buttons for 3s Power-Off Method 1: Put the EarBuds Rack into the chargingcase, it will auto power off. Method 2: Tap the multi-function buttons for 3s Answer/Hang up the call Tap the multi-function button to answer thecall, Tap the button again to hang up.
Decline a call Tap the multi-function button for 1s. Switch Audio Output Under the calling status, Tap the multi-functionbutton for 1s to switch audio output betweencellphone and Earbuds. Mute-on/off Under the calling status, Tap the multi-functionbutton twice to turn on or off the Mute function.
Play/Pause the music Tap the multi-function button to play pausethe music. Skip to last song Tap the multi-function button for 3 times to playlast song. Skip to next song Tap the multi-function button for 2 times to playnext song. Voice Assistant Under the standby status, tap the multi-functionbutton 2s to activeate the voice assistant(eg. Siri).
Call Redial Under the standby status , tap the multifunction button 4 times to realize the function of call redial at the end number the phone . Model: TW93 Transmission Distance: 15 meters Bluetooth Vision: V5.0 Charging Time: about 2 hour Talking Time: about 5 hours Battery type :li-ion Mode: HFP、HSP、A2DP、AVRCP Battery capacity: 50mAh Charging Case capacity: 500mAh Tips 1.Before use it, please read the user manualcarefully and keep it for future references. 2.
mode; if notpair it with mobile devices for a long time, it willexit pairing mode, please re-enter the pairingmode; if a procedure error occurs on mobiledevices, please reset it; otherwise, reset theEarBuds. Warning 1.Never disassemble or modifyit to avoid causing anydamages or dangers. 2.Do not store it in extreme temperatures(under 0 3.Keep it away from the kids. 4.Do not use it during thunderstorms. 5.Do not use harsh chemicals or strong detergentsto clean it. 6.Keepit dry.
FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
