User Manual Pro Cellular Blood Pressure Monitor TMB-2092-G Guangdong Transtek Medical Electronics Co., Ltd. Zone A, No.105, Dongli Road, Torch Development District, 528437 Zhongshan, Guangdong, China version:1.
TABLE OF CONTENTS INTRODUCTION 3 General Description Indications for Use Contraindications Measurement Principle Safety Information Display and Symbols Name of Each Part Contents/Product Includes BEFORE YOU START 10 The Choice of Power Supply Installing and Replacing the Batteries MEASUREMENT 12 Applying the cuff A: Using Single Measurement Mode B: Using Triple Measurement Mode INFORMATION FOR USER 17 Tips for measurement Maintenances ABOUT BLOOD PRESSURE 19 What are systolic pressure and dias
INTRODUCTION INTRODUCTION General Description Safety Information Thank you for choosing this arm type Pro Cellular Blood Pressure Monitor (TMB-2092-G). It is equipped with the following key features. Please read this manual to know how to use your Blood Pressure Monitor safely and correctly. Keep the manual well for future reference. The symbols below might be in the user manual, labeling or other component. They are the requirement of standard and using. One-Click Operation Large 4.
INTRODUCTION CAUTION INTRODUCTION CAUTION * This device is intended for indoor use. * The device contains sensitive electronic components.To avoid measurement errors, avoid taking blood * This device is portable, but it is not intended for use during patient transport. pressure measurements near a strong electromagnetic field radiated interference signal or electrical fast * This device is not suitable for continuous monitoring during medical emergencies or operations. transient/burst signal.
INTRODUCTION INTRODUCTION Display and Symbols SYMBOL 7 15 14 1 13 8 12 11 2 10 8 10 11 SIM card error icon Appears when the SIM card is abnormal or the SIM is not properly plugged in. 12 Data pending to transmit icon Appears when the data transmission failed. Up to 500 measurements can be temporarily saved on the device and send to your account when the Cellular internet is available. 13 Signal indication icon Indicates no cellular coverage or cellular connection error.
INTRODUCTION BEFORE YOU START Name of Each Part The Choice of Power Supply 1. DC 6V, 4 AA size batteries 2. AC adapter, 6V CUFF AIR CONNECTOR PLUG AIR HOSE 1A Please use the AC adapter authorized by the manufacturer! Please unplug the adapter to depart from the using utility power, when you finish the measurement.
BEFORE YOU START Note A: When you insert or replace batteries into the device, the LCD displays as below first, and then it will turn off after about 5 seconds. LCD display MEASUREMENT Applying the cuff 1. Remove all jewelry, such as watches and bracelets from your left arm. Note: If your doctor has diagnosed you with poor circulation in your left arm,use youre right arm. 2. Roll or push up your sleeve to expose the skin. Make sure your sleeve is not too tight. 3.
MEASUREMENT MEASUREMENT A: Using Single Measurement Mode Start a measurement 2. After the measurement, the data transmission starts. The symbol will appear on the LCD. When the “TRIPLE MODE” button is located on “OFF”, the monitor is under the Single Measurement mode. When the monitor is OFF, press the “START/STOP” button to turn on, and then it will complete the whole measurement automatically. LCD display Adjust the zero point If successful, the symbol the LCD will display “ ”.
MEASUREMENT MEASUREMENT B: Using Triple Measurement Mode 2.When the first measurement is done, it won’t show the readings. It will start the second measurement after 60 seconds. When the “TRIPLE MODE” buton is located on “ON”, the monitor is under the Triple Measurement mode. 1.When the monitor is off , press the “START/STOP” button to turn on, and then it will complete the whole measurement automatically. LCD display 3. Then it will repeat the steps to finish the third measurement.
INFORMATION FOR USER INFORMATION FOR USER Tips for Measurement Maintenance Measurements may be inaccurate if taken in the following circumstances. In order to get the best performance, please follow the instructions below. Immediate measurement after tea, coffee,smoking Put in a dry place and avoid the sunshine Avoid touching water, clean it with a dry cloth in case.
ABOUT BLOOD PRESSURE ABOUT BLOOD PRESSURE What are systolic pressure and diastolic pressure? When ventricles contract and pump blood out of the heart, the blood pressure reaches its maximum value in the cycle, which is called systolic pressure. When the ventricles relax, the blood pressure reaches its minimum value in the cycle, which is called diastolic pressure. Systolic Diastolic blood discharging artery blood entering vein press relax CAUTION Only a physician can tell your normal BP range.
ABOUT BLOOD PRESSURE Why does my blood pressure fluctuate throughout the day? 1.Individual blood pressure varies multiple times everyday.It is also affected by the way you tie your cuff and your measurement position,so peease take the measurement under the same conditions. 2. If the person takes medicine, the pressure will vary more. 3. Wait at least 3 minutes for another measurement. TROUBLE SHOOTING PROBLEM DISPLAY No power Display can not light up. Replace with new batteries.
SPECIFICATIONS AUTHORIZED COMPONENT Please use the authorized adapter External dimensions Approx.148.3 mm × 100.5 mm × 52 mm Display mode Digital LCD V.A. 79 mm × 93 mm Weight Approx.
EMC GUIDANCE EMC GUIDANCE The ME EQUIPMENT or ME SYSTEM is suitable for home healthcare environments. Warning: Don’t be near the active HF surgical equipment and the RF shielded room of an ME system for magnetic resonance imaging, where the intensity of EM disturbances is high. Warning: Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in improper operation.
EMC GUIDANCE FCC Statement Table 3 FCC ID: OU9TMB2092-G Guidance and manufacturer’s declaration - electromagnetic Immunity Radiated RF IEC61000-4-3 (Test specifications for ENCLOSURE PORT Test Frequency (MHz) 385 Band (MHz) 380-390 Service TETRA 400 RF wireless 450 430-470 GMRS 460, FRS 460 equipment) 710 745 704-787 780 Distance(m) IEC Compliance 60601-1-2 level Test Level (V/m) (V/m) Pulse modulation 18 Hz 1.8 0.3 27 27 2 0.3 28 28 0.2 0.3 9 9 2 0.3 28 28 2 0.
