version:1.0 User Manual Blood Pressure Monitor TMB-2088-T Arm Type Guangdong Transtek Medical Electronics Co., Ltd. Zone B, No.105 ,Dongli Road, Torch Development District, Zhongshan,528437,Guangdong,China Thank you very much for selecting TRANSTEK Blood Pressure Monitor TMB-2088-T. Please read the user manual carefully and thoroughtly so as to ensure the safe usage of this product, keep the manual well for further reference in case you have problems.
Table of Contents CATALOGUE INTRODUCTION..................................................................................................................2 General Description Indications for Use Contraindications Measurement Principle Safety Information LCD Display Signal Monitor Components List BEFORE YOU START..........................................................................................................
INTRODUCTION General Description Thank you for selecting TRANSTEK arm type blood pressure monitor (TMB-2088-T). The monitor features blood pressure measurement, pulse rate measurement and the result storage. The design provides you with two years of reliable service. Readings taken by the TMB-2088-T are equivalent to those obtained by a trained observer using the cuff and stethoscope auscultation method.
INTRODUCTION CAUTION 7KLV GHYLFH LV LQWHQGHG IRU DGXOW XVH LQ KRPHV RQO\ 7KH GHYLFH LV QRW VXLWDEOH IRU XVH RQ QHRQDWDO SDWLHQWV SUHJQDQW ZRPHQ SDWLHQWV ZLWK implanted, electronical devices, patients with pre-eclampsia, premature ventricular beats, atrial fibrillation, peripheral, arterial disease and patients undergoing intravascular therapy or arterio-venous shunt or people who received a mastectomy. Please consult your doctor prior to using the unit if you suffer from illnesses.
INTRODUCTION CAUTION 'R QRW ZDVK WKH FXII LQ D ZDVKLQJ PDFKLQH RU GLVKZDVKHU 7KH VHUYLFH OLIH RI WKH FXII PD\ YDU\ E\ WKH IUHTXHQF\ RI ZDVKLQJ VNLQ FRQGLWLRQ DQG storage state. The typical service life is 10000 times. ,W LV UHFRPPHQGHG WKDW WKH SHUIRUPDQFH VKRXOG EH FKHFNHG HYHU\ \HDUV DQG DIWHU maintenance and repair, by retesting at least the requirements in limits of the error of the FXII SUHVVXUH LQGLFDWLRQ DQG DLU OHDNDJH WHVWLQJ DW OHDVW DW PP+J DQG PP+J 3OHDVH GLVSRVH RI $&&(6625,
Component list of pressure measuring system INTRODUCTION Monitor Components CUFF 1 Cuff 2 Air Hose 3 PCBA 4 Pump 5 Valve AIR HOSE MEM BUTTON AIR CONNECTOR PLUG DC POWER SOCKET BEFORE YOU START The Choice of Power Supply 1.Battery powered mode: 6VDC 4×AA batteries 2.AC adaptor powered mode: 5V 1A (Please only use the recommended AC DGDSWRU PRGHO Please unplug the adaptor to depart from the using utility power.
BEFORE YOU START Setting Year,Date, Time It is important to set the clock before using your blood pressure monitor, so that a time stamp can be assigned to each record that is stored in the memory. (The setting range of the year :2020—2099; Time format: 24H) BEFORE YOU START 3.When you get the right year, press “START/STOP” to set down and turn to next step. 1.When the monitor is off, long press “SET”button,it will display [YEAR]. Each press “SET” button will decrease the number. 4.
BEFORE YOU START BEFORE YOU START 8.After the unit is set,the LCD will display “d nE” and then it will turn off. 5.Repeat steps 2 and 3 to set the [HOUR] and [MINUTE]. Setting the voice switch 1.When the monitor is off,long press “STRAT/STOP” button, it will enter 6.Repeat steps 2 and 3 to set “the trends start time”. voice setting mode.
BEFORE YOU START Setting the User ID BEFORE YOU START Install the App and Pair-Up Download the Transtek Health app from APP Store or Google Play. Install the APP, and register an account. 1.When the monitor is off, long press “MEM” button and then the user ID will shows. Press “MEM” or “SET”button to switch the user ID: user1, user 2 and user guest mode. Click k ,click “My setting”, choose the device and then bind the device and app 2.
BEFORE YOU START Search your test information After binding the app, back to the beginning page and click “Blood Pressure” to search your test information. BEFORE YOU START RF Frequency Range: 2402 MHz to 2480 MHz Output Power Range: G%P Supply Voltage: 1.8-3.6 V Transmitting Distance: 10 meters List of compatible devices: For iOS devices: The operating system must be iOS 11.0 or more. For Android devices: The operating system must be Android 8.0 or more.
MEASUREMENT MEASUREMENT Start the Measurement Tie the cuff Before you start the measurement,Download the Transtek Health app from APP Store or Google Play,and turn on the Bluetooth. Install the APP, and register an account. Then set your personal information (Gender, Birthday, Height, Weight, Name and so on). 1. Remove all jewelry, such as watches and bracelets from your left arm. Note: If your doctor has diagnosed you with poor circulation in your left arm, use your right arm. 1.
DATA MANAGEMENT MEASUREMENT Recall the Records 2.After the measurement was finished, the symbol will start blinking, and the data will start transmitting. ( Please connect the app during the WUDQVPLVVLRQ 3. If the data transmits successful, the symbol and symblo will disappear, and then the monitor will turn off. 1 When the monitor is off, please press “MEM” button,it will display the 1. average value of all the recods first. 2.
DATA MANAGEMENT DATA MANAGEMENT Recall the Records 3. Then show the latest measurement records, you can press the “MEM” or “SET” button to get the record you want. Delete the Records If you did not get the correct measurement, you can delete all results for the selected user by following steps. (Take User 1 for example.) 1. Long press “START/STOP”, when the monitor is in the memory recall mode(Not in the average VWDWH WKH IODVK GLVSOD\³G(/ $//´ User ID will show. 2.
INFORMATION FOR USER INFORMATION FOR USER Maintenance Tips for Measurement Measurements may be inaccurate if taken in the following circumstances. Within 1 hour after dinner or drinking Within 20 minutes after taking a bath Immediate measurement after tea, coffee, smoking In order to get the best performance, please follow the instructions below. Put in a dry place and avoid the sunshine Avoid touching water, clean it with a dry cloth in case.
ABOUT BLOOD PRESSURE ABOUT BLOOD PRESSURE What are systolic pressure and diastolic pressure? When ventricles contract and pump blood out of the heart, the blood pressure reaches its maximum value in the cycle, which is called systolic pressure. When the ventricles relax, the blood pressure reaches its minimum value in the cycle, which is called diastolic pressure.
SPECIFICATIONS TROUBLESHOOTING This section includes a list of error messages and frequently asked questions for problems you may encounter with your blood pressure monitor. If the products not operating as you think it should, check here before arranging for servicing. PROBLEM SYMPTOM CHECK THIS REMEDY Batteries are exhausted. Replace with new batteries No power Display will not light up.
FCC STATEMENT AUTHORIZED COMPONENT Authorized Component 1 please use the TRANSTEK authorized adapter. Adapter Model： BLJ06L060100P-V BLJ06L060100P-S BLJ06L060100P-B BLJ06L060100P-U Input：AC 100-240V 50/60Hz 0.2A Max Output：5V 1000mA Contact Information For more information about our products, please visit www.transtek.cn.you can get customer service, usual problems and customer download, transtek will serve you anytime. Manufactured by: Guangdong Transtek Medical Electronics Co., Ltd.
COMPLIED STANDARDS LIST Complied Standards List Risk management EN ISO 14971:2012 / ISO 14971:2007 Medical devices Application of risk management to medical devices Labeling EN ISO 15223-1:2016 / ISO 15223-1:2016 Medical devices. Symbols to be used with medical device labels, labelling and information to be supplied.
EMC GUIDANCE EMC GUIDANCE Table 3 Table 2 Guidance and manufacturer’s declaration – electromagnetic Immunity Immunity Test IEC 60601-1-2 Test level Compliance level Electrostatic discharge (6' IEC 61000-4-2 ±8 kV contact ±2 kV, ±4kV, ±8 kV, ±15 kV air ±8 kV contact Electrical fast transient/burst IEC 61000-4-4 ±2 kV for power supply lines ±1 kV signal input/output 100 kHz repetition frequency ±2 kV, ±4kV, ±8 kV, ±15 kV air ±2 kV for power supply lines ±1 kV signal input/output 100 kHz repetition
