User's Manual

BEFORE YOU START
BEFORE YOU START
3.When you get the right
year, press “START/STOP” button to set
down and then turn to next
step [MONTH] and [DAY] setting.
4.Repeat steps 2 and 3 to set
the [MONTH] and [DAY].
5
Setting Date, Time
It is important to set the clock before using your blood pressure
monitor, so that a time stamp can be assigned to each record that
is stored in the memory. (The setting range of the year :2020—2099
time format:24H)
1.When the monitor is off,
Long press “MEM”button,it will
display the time.Then
press “ MEM ” or “ USER ”
button to enter the
mode for year setting.
2.Press “MEM” or “USER” button
change the [YEAR].
Press “MEM” button will increase
one year, press “USER” button will
decrease one year.
.Repeat steps 2 and 3 to set the [HOUR] and [MINUTE].
6
.
After hour and minute are set,the LCD will display “do nE” and then turn off.
10 11