version:1.0 User Manual Blood Pressure Monitor TMB-2079 Arm Type Thank you very much for selecting TRANSTEK Blood Pressure Monitor TMB-2079 Guangdong Transtek Medical Electronics Co., Ltd. Zone B, No.105 ,Dongli Road, Torch Development District, Zhongshan,528437,Guangdong,China Please do read the user manual carefully and thoroughtly so as to ensure the safe usage of this product, and keep the manual well for further reference in case you have problems.
CATALOGUE Table of Contents INTRODUCTION..................................................................................................................2 General Description Indications for Use Contraindications Measurement Principle Safety Information LCD Display Signal Monitor Components List BEFORE YOU START..........................................................................................................
INTRODUCTION General Description Thank you for selecting TRANSTEK arm type blood pressure monitor (TMB-2079). The monitor features blood pressure measurement, pulse rate measurement and the result storage. The design provides you with two years of reliable service. Readings taken by the TMB-2079 are equivalent to those obtained by a trained observer using the cuff and stethoscope auscultation method.
INTRODUCTION CAUTION * This device is intended for adult use in homes only. * The device is not suitable for use on neonatal patients, pregnant women,patients with implanted, electronical devices, patients with pre-eclampsia, premature ventricular beats, atrial fibrillation, peripheral, arterial disease and patients undergoing intravascular therapy or arterio-venous shunt or people who received a mastectomy. Please consult your doctor prior to using the unit if you suffer from illnesses.
INTRODUCTION CAUTION * The service life of the cuff may vary by the frequency of washing, skin condition, and storage state. The typical service life is 10000 times. * It is recommended that the performance should be checked every 2 years and after maintenance and repair, by retesting at least the requirements in limits of the error of the cuff pressure indication and air leakage (testing at least at 50mmHg and 200mmHg).
BEFORE YOU START INTRODUCTION The Choice of Power Supply Monitor Components 1.Battery powered mode: 6VDC 4×AAA batteries Component list of pressure measuring system CUFF AIR HOSE 1 Cuff 2 Air pipe 3 PCBA 4 Pump 5 Valve AIR CONNECTOR PLUG LCD DISPLAY MEM BUTTON START/STOP BUTTON BATTERY COMPARTMENT Please unplug the adaptor to depart from the using utility power.
BEFORE YOU START Setting Date, Time BEFORE YOU START 4.Repeat steps 2 and 3 to set the [MONTH] and [DAY]. It is important to set the clock before using your blood pressure monitor, so that a time stamp can be assigned to each record that is stored in the memory. (The setting range of the year :2020—2099 time format:24H) 1.When the monitor is off, Long press “MEM”button,it will display the time.Then press “ MEM ” or “ USER ” button to enter the mode for year setting. 5 .
BEFORE YOU START Setting the trends time 1 .When the monitor is off, press “MEM” button to enter memory mode, press both “USER” and “MEM” buttons at the same time,it will display right picture, you could set the trends start time, press “MEM” button will increase time, press“USER” button will decrease time. BEFORE YOU START Select the User ID Before you start the measurement, please select the desired user ID first. 1.
BEFORE YOU START Install the App and Pair-Up Download the MedM Health app from APP Store or Google Play. Install the APP, and register an account. BEFORE YOU START Search your test information After binding the app, back to the beginning page and click “Blood Pressure” to search your test information.
MEASUREMENT BEFORE YOU START Tie the cuff RF Frequency Range: 2402 MHz to 2480 MHz Maximum output power: 2.7dBm Supply Voltage: 1.8-4.5 V Transmitting Distance: 10 meters 1. Remove all jewelry, such as watches and bracelets from your left arm. Note: If your doctor has diagnosed you with poor circulation in your left arm, use your right arm. List of compatible devices： For iOS devices: The operating system must be iOS 11.0 or more. For Android devices The operating system must be Android 8.0 or more 3.
MEASUREMENT MEASUREMENT Start the Measurement Before you start the measurement,Download the Transtek Health app from APP Store or Google Play,and turn on the Bluetooth. Install the APP, and register an account. Then set your personal information (Gender, Birthday, Height, Weight, Name and so on). 1.Please switch the “User” button to select the user between User 1 and User 2.
DATA MANAGEMENT DATA MANAGEMENT Recall the Records Recall the Records 1 1. When the monitor is off, please press “MEM” button,it will display the average value of all the recods in trends time. 3. Then show the latest measurement records, you can press the “MEM” or “SET” button to get the record you want. N 2. Each press “MEM” button will show next record,there are seven average trends from the latest records to the earliest records. Date, Time, Year will display alternately. N N The current No.
DATA MANAGEMENT DATA MANAGEMENT 4.If there is no record, when you press“MEM” button to check the record, the following display will be shown. Delete the Records If you did not get the correct measurement, you can delete all results for the selected user by following steps. (Take User 1 for example.) 1. Long press “MEM” button, when the monitor is in the memory recall mode(Not in the trends chart),the display will show “dE LE no” + User ID. 2.
INFORMATION FOR USER INFORMATION FOR USER Maintenance Tips for Measurement Measurements may be inaccurate if taken in the following circumstances. In order to get the best performance, please follow the instructions below.
ABOUT BLOOD PRESSURE ABOUT BLOOD PRESSURE What are systolic pressure and diastolic pressure? When ventricles contract and pump blood out of the heart, the blood pressure reaches its maximum value in the cycle, which is called systolic pressure. When the ventricles relax, the blood pressure reaches its minimum value in the cycle, which is called diastolic pressure.
SPECIFICATIONS TROUBLE SHOOTING This section includes a list of error messages and frequently asked questions for problems you may encounter with your blood pressure monitor. If the products not operating as you think it should, check here before arranging for servicing. PROBLEM SYMPTOM No power Low batteries Error message Warning message Display will not light up. CHECK THIS REMEDY Batteries are exhausted. Replace with new batteries Batteries are inserted incorrectly.
FCC STATEMENT AUTHORIZED COMPONENT Authorized Component FCC Statement 1.please use the TRANSTEK contains FCC ID：OU9TMB2079-B authorized adapter. Adapter Model： BLJ06L060100P-V BLJ06L060100P-S BLJ06L060100P-B BLJ06L060100P-U Input： AC 100-240V 50/60Hz 0.2A Max Output：5V 1000mA Contact Information For more information about our products, please visit www.transtek.cn.you can get customer service, usual problems and customer download, transtek will serve you anytime.
COMPLIED STANDARDS LIST Complied Standards List Risk management EN ISO 14971:2012 / ISO 14971:2007 Medical devices Application of risk management to medical devices Labeling EN ISO 15223-1:2016 / ISO 15223-1:2016 Medical devices. Symbols to be used with medical device labels, labelling and information to be supplied.
EMC GUIDANCE EMC GUIDANCE Table 3 Table 2 Guidance and manufacturer’s declaration – electromagnetic Immunity Immunity Test Electrostatic discharge (ESD) IEC 61000-4-2 Electrical fast transient/burst IEC 61000-4-4 IEC 60601-1-2 Test level Compliance level ±8 kV contact ±2 kV, ±4kV, ±8 kV, ±15 kV air ±8 kV contact ±2 kV for power supply lines ±1 kV signal input/output 100 kHz repetition frequency ±2 kV, ±4kV, ±8 kV, ±15 kV air ±2 kV for power supply lines ±1 kV signal input/output 100 kHz repetiti
