LS802-GS standard User Manual Customizable : Size：100 x 140 mm Material (recommened): 80g/m² (80g书纸) Update your company contact information on back cover and Page 21 Color: black Transtek Logo → Customized Logo version:1.0 User Manual Blood Pressure Monitor LS802-GS Guangdong Transtek Medical Electronics Co., Ltd. Zone A, No.
CATALOGUE Table of Contents INTRODUCTION...................................................................................................................2 General Description Indications for Use Contraindications Measurement Principle Safety Information Display and Symbols Name of Each Part Contents/Product Includes BEFORE YOU START.............................................................................................................
INTRODUCTION General Description Thank you for selecting this arm type blood pressure monitor (LS802-GS). The monitor features blood pressure measurement, pulse rate measurement and the result storage. The design provides you with two years of reliable service. Safety Information The symbols below might be in the user manual, labeling or other component. They are the requirement of standard and using. Refer to instruction manual/booklet To signify that the instruction manual/ booklet must be read.
INTRODUCTION INTRODUCTION CAUTION * This device is intended for indoor, home use. * This device is not intended for public use. * This device is portable, but it is not intended for use during patient transport. * This device is not suitable for continuous monitoring during medical emergencies or operations. * This device is intended for no-invasive measuring and monitoring of arterial blood pressure.
INTRODUCTION INTRODUCTION Display and Symbols 7 SYMBOL 8 9 EXPLANATION 1 Systolic blood pressure reading 2 Diastolic blood pressure reading 6 Excessive body mo�on detector symbol 1 3 2 4 Appears when talking, moving, or shaking of the arm with the cuff on is detected during a measurement. NOTE: The measured blood pressure reading may not be accurate when this symbol is displayed with the reading. Pulse display Heartbeat symbol Flashes when decteted during the measurement.
INTRODUCTION BEFORE YOU START The Choice of Power Supply Name of Each Part 1. Battery powered mode: 6V DC 4× AA batteries 2.
MEASUREMENT BEFORE YOU START Applying the cuff Note When you insert or replace batteries into the device, the symbol and will display on the LCD alternately. This indicates that the device is searching and pairing with a mobile network. 1. You can long press the “START/STOP” button to end pairing and use the device. If you manually cancel pairing, the device may take longer to send a measurement after use. 2. Remove all jewelry, such as watches and bracelets from your left arm.
MEASUREMENT MEASUREMENT Taking a Measurement Helpful tips to help ensure an accurate reading Take the measurement in a silent room. Rest for 5 minutes before a measurement. Be relaxed, Remain still and DO NOT talk while taking a measurement. For a meaningful comparison, try to measure under similar conditions. For example, take daily measurements at approximately the same time, on the same arm, or as directed by a physician. 2. After the measurement, the data transmission starts.
INFORMATION FOR USER Tips for Measurement Maintenance Measurements may be inaccurate if taken in the following circumstances. In order to get the best performance, please follow the instructions below. Within 1 hour after dinner or drinking Within 20 minutes after taking a bath In a very cold environment 14 INFORMATION FOR USER Immediate measurement after tea, coffee, smoking Put in a dry place and avoid the sunshine Avoid touching water, clean it with a dry cloth in case.
ABOUT BLOOD PRESSURE ABOUT BLOOD PRESSURE What are systolic pressure and diastolic pressure? When ventricles contract and pump blood out of the heart, the blood pressure reaches its maximum value in the cycle, which is called systolic pressure. When the ventricles relax, the blood pressure reaches its minimum value in the cycle, which is called diastolic pressure.
ABOUT BLOOD PRESSURE TROUBLE SHOOTING Why does my blood pressure fluctuate throughout the day? 1. Individual blood pressure varies multiple times everyday. It is also affected by the way you tie your cuff and your measurement position, so please take the measurement under the same conditions. 2. If the person takes medicine, the pressure will vary more. 3. Wait at least 3 minutes for another measurement.
SPECIFICATIONS AUTHORIZED COMPONENT External dimensions Approx.159.2 mm × 121.5 mm × 68.1 mm Display mode Digital LCD V.A. 78 mm × 92 mm Weight Approx.393 g (Excluding the batteries and cuff) Measurement mode Oscillographic testing mode Mode of operation Continuous operation Measurement range Authorized Component Please use the authorized adapter (Not included).
FCC STATEMENT FCC Statement FCC ID: OU9LS802GSM2 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
EMC GUIDANCE EMC GUIDANCE Table 3 Table 2 Guidance and manufacturer’s declaration – electromagnetic Immunity Immunity Test IEC 60601-1-2 Test level Compliance level Electrostatic discharge (ESD) IEC 61000-4-2 ±8 kV contact ±2 kV, ±4 kV, ±8 kV, ±15 kV air ±8 kV contact ±2 kV, ±4 kV, ±8 kV, ±15 kV air Electrical fast transient/burst IEC 61000-4-4 ±1 kV ±2 kV,100 kHz repetition frequency For AC power port: Power supply lines: ±2 kV Surge IEC61000-4-5 ±1 kV (Line to ±0.5 kV line) ±0.
