Users Manual



Initial Start-Up
2.Wi-Fi Connection
Make sure the Wi-Fi is ON when pair-up is proceeding. Then follow the prompts on APP
to bound to the scale.
Select Measurement Unit
With batteries correctly installed, press “UNIT” button in the back of the scale to select
measurement unit. The default measurement unit is “kg”. You may press “UNIT” button to
choose between kilogram and pound.
With original SENSE ON patent technology, GBF-2008-BF will switch on as you step
on the platform barefooted.
Daily Measurement
Stand still and keep full contact with the electrodes until the LED stops blinking digits.
Heart Rate Measurement
The heart rate is measured on the APP and this function is turned on by default. If you
close this function, only the weight data shown on the scale.
When the function of heart rate measurement is on, after the scale locks the weight, it
starts to measure the heart rate. The scale displays moving “ ” during the
measurement.
Start Measuring
After the heart rate measurement is completed, the measuring result will be shown.
Then the all measuring results will be displayed one time again: Weight and Heart
Rate result. And trun off.