version:1.0 User Manual Body Fat Analyzer GBF-2008-BF Thank you very much for selecting the Transtek Body Fat Analyzer GBF-2008-BF. ZHONGSHAN TRANSTEK ELECTRONICS CO., LTD No.23,Jin'an Road, Minzhong, Zhongshan, 528441, Guangdong, China TEL:86-760-88282982 www.transtek.cn Please do read the user manual carefully and thoroughly so as to ensure the safe usage of this product, and keep the manual well for further reference in case you have problems.
Table of Contents Table of Contents Safety Information Safety and Usage Information .................................................................................................. 2 Your Scale and Its Environment ............................................................................................... 3 Efficient Use of Your Scale ........................................................................................................ 3 Overview Device Components ...................................
Safety Information Safety Information Safety and Usage Information INDICATIONS FOR USE The warning signs and symbols are essential to ensure your correct and safe use of this product and protect you and others from injury.
Overview Overview Device Components LED Display LED Display Electrodes Electrodes UNIT and activation Button Battery Compartment Successful Wi-Fi Connection Pound Successful Bluetooth Connection Kilogram Resting Heart Rate Result Sensor List 1. Body Fat Analyzer GBF-2008-BF 2. Four AAA-size Batteries (1.5V per each) 3.
Initial Start-Up General Instructions Transtek Body Fat Analyzer GBF-2008-BF applies BIA (Bio-impedance Analysis) technology. A small amount of weak current flows through the human body so as to detect the bio-impedance and estimate body fat and heart rate. The electrical current is small and may not be felt. This BIA technology is cheap, safe, non-invasive, toxic-free and harmless. It also possesses the characteristics of simple operation and abundant information.
Initial Start-Up 2.Wi-Fi Connection Make sure the Wi-Fi is ON when pair-up is proceeding. Then follow the prompts on APP to bound to the scale. Start Measuring Daily Measurement With original SENSE ON patent technology, GBF-2008-BF will switch on as you step on the platform barefooted. Stand still and keep full contact with the electrodes until the LED stops blinking digits. Heart Rate Measurement The heart rate is measured on the APP and this function is turned on by default.
Start Measuring When finishing all measurement, the detailed measurement results will show on APP automatically. You can check it anytime. Manage Your Health Data Transmission With GBF-2008-BF successfully pair-up with your smartphone, the measurement data will be transmitted to your mobile via Bluetooth or Wi-Fi. ONLY when the measuring results are attached to a specific User ID will it be transmitted to your mobile after measurement.
Troubleshooting Troubleshooting Error Prompt Error Description Overload. The device will power off. Low Battery. The device will power off. The heart rate analysis fails to complete the analysis. Solution Stop using this scale for measurement. Replace all four batteries in the same time. Please purchase the authorized batteries for replacement. Turn on the heart rate measurement function on the APP.
Troubleshooting Specifications Specifications When Data Transmitting ... Problem Root Cause Bluetooth or Wi-Fi is OFF. The APP is OFF. Solution Turn ON the Bluetooth or Wi-Fi via Settings. Press the icon to turn ON your APP. Data transmission failed. Out of range of Bluetooth or Wi-Fi transmission. None of the user ID is assigned. Place your smartphone closer to the scale. Please assign a User ID on the APP. Product Name Dimension Scale: 300x300x25.
Maintenance Maintenance When carrying out usual maintenance, please ensure practice of the following Do’s and Don’ts: DO use a dry soft cloth to wipe the dust. DO use a wet soft cloth, dipped into water and wrung out, to wipe the dirt. Then use a dry soft cloth to dry up the device. DON’T wash the device with water or immerse it in water. DON’T use propellant, abrasive or other chemicals to wipe the dirt in avoidance of discolor or malfunction. DON’T disassemble this device.
Appendix Appendix Warning Warning：Don’t near active HF surgical equipment and the RF shielded room of an ME system for magnetic resonance imaging, where the intensity of EM disturbances is high. Warning： Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in improper operation. If such use is necessary, this equipment and the other equipment should be observed to verify that they are operating normally.
Appendix Table 3 Guidance and manufacturer’s declaration - electromagnetic Immunity Radiated RF IEC61000-4-3 (Test specifications for ENCLOSURE PORT IMMUNITY to RF wireless communications equipment) Test Frequency (MHz) Band (MHz) Service Modulation Modulation (W) Distance (m) 385 380 – 390 TETRA 400 Pulse modulation 18 Hz 1,8 0.3 IMMUNITY TEST LEVEL (V/m) 27 450 430 – 470 GMRS 460, FRS 460 FM ± 5 kHz deviation 1 kHz sine 2 0.
