User's Manual

After confirming Stature, the system will divert to Age

setting.

As pictured below, the digits “35” blinks. The operator may

press the function key or to increase or decrease the

numeral.

You may press and hold the function key or for fast

changing the numeral.

Press “SET” key to confirm Age.

When the LCD displays “STEP ON”, you may start.

Initial Start-Up

5.Setting Age

6. Repeat procedure for a second user, or to change user details.

Note: To update or overwrite the memorised data, follow the same procedure, making

changes as required.

Select Measurement Unit

With batteries correctly installed, press “UNIT” button in the back of the scale to select

measurement unit. The default measurement unit is “lb”. You may press “UNIT” button to

choose between pound and kilogram.

Configure the Wi-Fi Password

1. Install the APP “Weight Gurus”. This APP could be freely downloaded at the APP

Store, you may search and install it in your smartphone.

2. Turn on Wi-Fi and the APP. Make sure both are ON when pair-up is proceeding.

3. Then register an account, and follow these steps:

Note: Take the latest version of APP as the criterion.

4. Press and hold “UNIT” button in the back of the scale to start pair-up. Symbol “SETUP 1”

will be blinked on the LCD, indicating pair-up is proceeding.

5. Wait for the scale counts "SETUP 1" to "SETUP 1234", if SUCCEED, symbol “[ ]” will

be shown on the LCD.

6. And follow these steps on APP to complete the matching. At this time, it indicates that

the scale has been successfully distributed. Then you can start measuring.