User's Manual

1
2
Installation
The M2 is designed for all
environments and can be installed
either in indoor or outdoor
environments.
Mounting Orientation
The most important consideration is
to keep the M2 radio unit UPRIGHT
when it is installed.
The antenna is located on the top of
the radio board and the RF
transmission pattern is optimized
with an upright orientation.
In the UPRIGHT position:
• The hanging slot is at the top of
the unit
• The T2 logo will be readable at
the top of the housing
• The battery will be at the bottom
Other primary considerations for
optimum transmission:
• Avoid mounting the radio unit
directly against metal surfaces
(pipes, valves, etc.)
• Avoid mounting the unit below
typical water levels.
• Do NOT drive screws or
mounting hardware into the
unit’s plastic housing.
• Always mount the unit at the
highest grade possible.
INSTALLATION &
W
IRING
In all cases, the installer
should experiment with
mounting techniques and RF
performance prior to quantity
installation.