User's Manual

1
3
Operation
The M2 radio operation is covered
in five topics:
• ON/OFF Control
• Configuration
• Meter Reading
• Datalogging
• RF Operations
Refer to the FPDA, H2 and G2
Manuals for additional
instructions on the operation of
the M2 radio.
This manual only provides an
overview on these topics.
ON/OFF Control
If the M2 radio has been purchased
as a separate unit, it will be shipped
in the default setting. This will be in
the OFF mode.
The Field PDA, H2 handheld or G2
provides the ability to set the M2
into one of three modes:
OFF: The RF transmission, meter
interface and all data functions are
off. The unit will monitor the IrDA
port for ON/OFF commands.
OPERATION
Standby: The RF transmission
function is off but the meter interface
and all data functions are on. The unit
will monitor the IrDA port for ON/OFF
commands.
ON: The RF transmission, meter
interface and all data functions are on.
The unit will monitor the IrDA port for
ON/OFF commands.