User's Manual

1
3
OPERATION
Operation
The M1B radio operation is covered
in three topics:
• ON/OFF Control
• Configuration
• Meter Reading
• Datalogging
• RF Operations
Refer to the FPDA Manual for
detailed instructions on the
operation of the M1B radio.
This manual only provides an
overview on these topics.
ON/OFF Control
Standby: The RF transmission
function is off but the meter interface
and all data functions are on. The unit
will monitor the IrDA port for ON/OFF
commands.
If the M1B radio has been
purchased as a separate unit, it will
be shipped in the default setting.
This will be in the OFF mode.
The Field PDA provides the ability to
set the M1B into one of three modes:
ON: The RF transmission, meter
interface and all data functions are on.
The unit will monitor the IrDA port for
ON/OFF commands.
OFF: The RF transmission, meter
interface and all data functions are
off. The unit will monitor the IrDA
port for ON/OFF commands.