User's Manual

M
M
1
1
Utility
Radio
Transmitter
GENERAL OPERATIONS
Initial Mode
Initial mode at startup is sleep mode.
Start Radio
To start the radio, briefly position magnet on marker
on the front (see diagram). A general sweep from top to
bottom across the marker will work best. All subsequent
positioning of the magnet on marker will force an
immediate read of the MIU.
Soft Reset
Holding the magnet on the marker for 10 seconds or more
will cause a soft reset of the radio. The initial state after a
soft reset will be sleep mode. The unit will need to be
started as above.
Front View of M1
Marke
r
LEDs
Force MIU Read
Positioning of a magnet on the marker for anything less than 10 seconds will force a new
read of the MIU.
LED Indicators
Green LED will flash during every radio transmission. This will only take place for one
minute after a Radio Start and/or a Force MIU Read.
Red LED will flash during every radio transmission that has a tamper count (a failure to
obtain an error-free reading of the MIU). This will only take place for one minute after a
Radio Start and/or a Force MIU Read.
Both Green and Red LED’s On a Soft-Reset will indicate (turn on) when the 10-second
reset limit has been reached. This indicator will cease when the magnet is removed.
Transparent Technologies, Inc.
www.transparenttech.com