User's Manual

1
2
Electric Meter Installation
Refer to Landis & Gyr
documentation and local electrical
code for installation requirements of
the FOCUS meter. All installations
should be performed by qualified
electrical professionals.
M2e Installation
The M2e is designed for embedding
within a Landis & Gyr electric meter
only.
For safety and quality assurances,
the installation of the M2e radio
PCB must be performed at the T2
factory.
Removal or alternation of the M2e
PCB within the FOCUS meter will
result in a void of warranty.
Notice:
Per FCC and Industry Canada
regulations, the Landis & Gyr meter
with the M2e radio should never be
installed within 8 inches (20cm ) of
typical people locations.
Radio Orientation
The FOCUS meter is intended to be
installed vertically (such that the front
panel LCD is visible). In this orientation,
the M2e antenna is positioned in the
optimum way and should perform well.
INSTALLATION