User's Manual

4
3
The software will have a GET Data button, which will initiate the communication with the
M2e board. The command will retrieve the entire M2e data packet and populate the data
shown.
The software will also have a SET Data button, which will initiate an updated data packet
being sent to the M2e board.
The available settings on the M2e radio (default settings are shown in bold)
Meter Settings Selections
ID Type: User / Meter
Meter Type: L&G FOCUS kWh
Tx Summation: kWh+, kWh-, Net, Added
Transmit Settings Selections
Transmit Interval 2, 3, 4, 5, 6, 7, 8, 9, 10
Transmit Scaling N/A
Data/Log Settings Selections
Log/Query Interval 1, 2, 5, 10, 15, 20, 30, 60
Peak Demand Days 0 (off) to 31
Peak Demand Threshold Selectable kWh
High Usage Days 0 (off) to 31
High Usage Threshold Selectable kWh
Voltage Sag% 0 to 100% (10%)
Voltage Swell% 0 to 100% (10%)