Installation Guide

1. Roughing In and Preparation

IMPORTANT! Before installing this sink, verify that the distance from the top

of the cabinet to the top of the doors (A) is greater than the apron height (B).

2. Prepare the Sink Base Cabinet

Farmhouse sinks require custom sink base cabinets with a front cutout to ac-

commodate a *10” deep sink. CAUTION: Measure your Transolid

reclay farm-

house sink for actual depth and make your front cutout on your actual meas-

ured depth (B). *The depth on some models may vary. i.e. Villa FUDT32209

Build a plywood platform on a support frame inside the sink base cabinet. Plat-

form must support the weight of the sink and any attachments such as garbage

disposals. When the sink is placed onto a platform, make sure the top of the

sink is evenly ush against the bottom of the countertop. Allow clearance for

water supply lines, drains and garbage disposal, as necessary.

INSTALLATION INSTRUCTIONS - FIRECLAY FARMHOUSE SINKS

CAUTION: All installation types need to allow room for faucet installation. Ensure adequate

clearance behind the sink for any faucet and backsplash, as well as full range of motion for

faucet spouts and handles.

Installation Options

Transolid

farmhouse sinks offer different installation options depending on your cabinet design.

Installation types include under-counter (referred to here as undermount), ush mount, built-up, and

above counter. Not all installation types are included in these instructions.

Undermount Installation Flush mount Installation Built-up Installation

Typical undermount Installation with

1/4” reveal is recommended.

Built-up installation may

expose sink sides to be

raised up to 1” above the

countertop.