Installation Guide

4.Drawalevelline14”outfromthecorneroftheshowerinbothdirections.
5.Placetheseatbracketinthecornerandlineuptheholesinthe brack etwiththelinedrawn.Mark
theholelocations.
6.Drill1/8”holesatthemarksonthewall.Inthesamelocations,enlargetheholesbydrilling¼”holes
enoughtopenetratethesolidsurfacematerial,sothatthecrewsdonotthreadintothesolidsurface.
7.Placebracketonthewall,aligningtheholeswiththebracket,andsecuretowallwithprovided
screws.
8.ApplySilicone
tothebracket andtotheedgeoftheseatthatwilltouchthefinishedwall.
9.Placetheseatfirmlyonthebracket,squeezingouttheexcesssilicone.
10.Applysiliconetoalljointstofinish.Siliconecleanupcaneasilybedonewithdenaturedalcoholand
acleanragbeforethesiliconeiscured.

