Multi Meter

OptionBBS
Black Body Source Temperature Module
Option BBS - Specifications.doc
Version 1.00
The 9000A Series black body temperature calibration module
option provides the ability to calibrate infrared thermometers.
The black body module has an independent power switch,
allowing the module to be powered up only when use is
required.
The electronic temperature control unit has three buttons to
configure for control of the electronic temperature
To calibrator an infrared thermometer simply aim laser at
centre of black body insert.
Setting a temperature
Using the control buttons underneath the display,
press and hold the button – this will display the
‘target’ temperature. Whilst holding down the
button press either the
or arrow buttons to
increase / decrease the target temperature then
release the buttons. The electronic temperature
controller will automatically increase / decrease
the temperature until it reaches the temperature
selected.
Option BBS : Specifications
Range : Ambient to 200°C
Resolution : 0.1°C
Target size : 38mm Diameter
Target type : Ridged
Emissivity : >0.95
Option BBS : Features
 Built In digital temperature controller
 Ridged 38mm target
 Supports °C and °F
 Integrated temperature sensor