Switch User Manual

31
MEWT - Middle European Winter
SWT - Swedish Winter
EET - Eastern European, USSR Zone 1 +2 hours 2 pm
BT - Baghdad, USSR Zone 2 +3 hours 3 pm
ZP4 - USSR Zone 3 +4 hours 4 pm
ZP5 - USSR Zone 4 +5 hours 5 pm
ZP6 - USSR Zone 5 +6 hours 6 pm
WAST - West Australian Standard +7 hours 7 pm
CCT - China Coast, USSR Zone 7 +8 hours 8 pm
JST - Japan Standard, USSR Zone 8 +9 hours 9 pm
EAST - East Australian Standard GST
Guam Standard, USSR Zone 9
+10 hours 10 pm
IDLE - International Date Line
NZST - New Zealand Standard
NZT - New Zealand
+12 hours Midnight
• SNTP Sever IP: Set the SNTP server IP address
• Switch Timer: Display the switch current time
• Daylight Saving Period: Set up the Daylight Saving beginning and ending time. Daylight
Saving beginning and ending time will be different in every year
• Daylight Saving Offset (mins): Configure the offset value
•
And then, click
Apply
button
[NOTE] Remember to execute the “Save Configuration” action, otherwise the new configuration will
lose when switch power off.
SNTP Configuration