Switch User Manual

30
IP configuration interface
SNTP Configuration
User can configure the SNTP (Simple Network Time Protocol) settings. The SNTP allows user to
synchronize switch clocks in the Internet.
• SNTP Client: To enable or disable SNTP function to get the time from the SNTP server
• Daylight Saving Time: To enable or disable daylight saving time function. When daylight
saving time is enabling, user need to configure the daylight saving time period
• UTC Timezone: Set the switch location time zone. The following table lists the different location
time zone for the reference. User also can drag down the list to find the time zone user want it.
Local Time Zone Conversion from UTC Time at 12:00 UTC
November Time Zone - 1 hour 11am
Oscar Time Zone -2 hours 10 am
ADT - Atlantic Daylight -3 hours 9 am
AST - Atlantic Standard
EDT - Eastern Daylight
-4 hours 8 am
EST - Eastern Standard
CDT - Central Daylight
-5 hours 7 am
CST - Central Standard
MDT - Mountain Daylight
-6 hours 6 am
MST - Mountain Standard
PDT - Pacific Daylight
-7 hours 5 am
PST - Pacific Standard
ADT - Alaskan Daylight
-8 hours 4 am
ALA - Alaskan Standard -9 hours 3 am
HAW - Hawaiian Standard -10 hours 2 am
Nome, Alaska -11 hours 1 am
CET - Central European
FWT - French Winter
MET - Middle European
+1 hour 1 pm