Switch User Manual

28
Event Configuration
The selected events that occur will send out the alert to the assigned SMTP server. Also, user can
select port events for alerting.
• System event selection: 4 selections – Device cold start, Power status, SNMP Authentication
Failure, and X-Ring topology changes. Mark the checkbox to select the event. When selected
events occur, the system will sent out the alerting

Device cold start: When the device executes cold start action, the system will send out
the alert to the dedicate SMTP server

Power status: When the device power status has changed, the system will send out the
alert to the dedicate SMTP server
 SMNP Authentication Failure: When the SNMP authentication fail, the system will
send out the alert to the dedicate SMTP server

X-Ring topology change: When the X-Ring topology has changed, the system will
send out the alert to dedicate SMTP server
• Port event selection: Select the per port events. Per port has 3 selections – Link UP, Link
Down, and Link UP & Link Down. Disable means no event is selected

Link UP: The system will send out an alert when port connection is up only

Link Down: The system will send out an alert message when port connection is down
only
 Link UP & Link Down: The system will send out an alert message when port
connection is up and down
•
After selected, click
Apply
Event Configuration interface