Switch User Manual

Transition Networks SISGM1040-162D-LR
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
41
SystemLog, SMTP and Event Commands Set
Command Level Description Example
systemlog ip
[IP address]
G Set System log server
IP address.
switch(config)# systemlog ip
192.168.1.100
systemlog mode
[client|server|both]
G Specified the log
mode
switch(config)# systemlog mode
both
show systemlog E Displays system log. Switch>show systemlog
show systemlog P Show system log
client & server
information
switch#show systemlog
no systemlog G Disable systemlog
functon
switch(config)#no systemlog
smtp enable G Enable SMTP function switch(config)#smtp enable
smtp serverip
[IP address]
G Configure SMTP
server IP
switch(config)#smtp serverip
192.168.1.5
smtp authentication G Enable SMTP
authentication
switch(config)#smtp
authentication
smtp account
[account]
G Configure
authentication account
switch(config)#smtp account
User
smtp password
[password]
G Configure
authentication
password
switch(config)#smtp password
smtp rcptemail
[Index] [Email address]
G Configure Rcpt e-mail
Address
switch(config)#smtp rcptemail 1
[e-mail]
show smtp P Show the information
of SMTP
switch#show smtp
no smtp G Disable SMTP
function
switch(config)#no smtp
event device-cold-start
[Systemlog|SMTP|Both]
G Set cold start event
type
switch(config)#event device-cold-
start both
event authentication-
failure
G Set Authentication
failure event type
switch(config)#event
authentication-failure both