Network Hardware User Manual

SDSFE31xx-100 Industrial Device Server Transition Networks
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
27
Configuration software, continued
Configuration
menu options
Click the Configuration
link to show its two submenu options:
• Serial Port Config
• Serial Connect Status
Serial port
config submenu
Click the “serial port config
” link to launch the Device Server serial port
configuration submenu. See Figure 21.
Figure 21: Serial Port Transfer Configuration Submenu Display
Use this menu to configure server/client mode and the serial port. This menu shows
the serial port configuration, and allows configuring all fields.
When using a serial device with Modbus RTU protocol, “enable” Packet mode for
the serial input. Also, enter an appropriate inter-packet timeout value to facilitate
smooth data communications. Click the APPLY button to save and activate the
changes. Click the RESET button to return to the previous settings before applying
the changes.
The following explains the server/client mode configuration submenu items.
Continued on next page