Leaflet

Specifications
Standards IEEE Std. 802.3™ 100BASE-FX;
100BASE-TX
Jumpers Jumper Block 1: AutoCross™ enable
Switches SW1: Auto-Negotiation On/Off
SW2: Pause TX On/Off
SW3: LPT On/Off
SW4: FEF On/Off
Status LEDs Power: Lit for normal operation
SDF (Signal Detect Fiber):
Lit for fiber link
SDC (Signal Detect Copper):
Lit for copper link
RXF (Receive Fiber):
Flashing = RX data
RXC (Receive Copper):
Flashing = RX data
Dimensions Width: 3.0" [76 mm]
Depth: 4.7" [119 mm]
Height: 1.0" [25 mm]
Power External AC/DC required; 9V DC. 1.0A; unregulated;
standard
Environment -25° C to +65° C; 5% – 95% humidity non-condens-
ing; 0 – 10,000 feet altitude
Shipping Weight 2 lbs. [0.90 kg]
Safety Compliance Wall Mount Power Supply:
UL Listed and CSA certified
Regulatory Compliance FCC Class A; EN55024; EN55022 Class A; EN61000;
CE Mark
Warranty Lifetime
AUTO NEG
AUTO CROSS
LINK PASS THRU
FAR END FAULT
LINK RESTORE
AUTO
PAUSE
Ordering Info
E-100BTX-FX-05(HT)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (ST)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
E-100BTX-FX-05(SCHT)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1300nm multimode (SC)
[2 km/ 1.2 mi.] Link Budget: 11.0 dB
E-100BTX-FX-05(SMHT)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
E-100BTX-FX-05(LHHT)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
E-100BTX-FX-05(XLHT)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[60 km/37.3 mi.] Link Budget: 33.0 dB
E-100BTX-FX-05(LWHT)
100BASE-TX (RJ-45) [100 m/328 ft.]
to 100BASE-FX 1550nm SM (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
Optional Accessories
(sold separately)
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-CC
Piggy Back Power Supply
SPS-1872-SA
Stand-Alone Power Supply
Mounting Options:
RMS19-SA4-01
4-slot Media Converter Shelf
WMBD
DIN Rail Bracket 5.0" [127 mm]
WMBD-FS
DIN Rail Bracket (flat, small) 3.1" [79 mm]
WMBL
Wall Mount Bracket 4.0" [102 mm]
WMBV
Vertical Wall Mount Bracket 5.0" [127 mm]
Extended Temperature Applications (to 65°C)
Connect Remote Devices
Connect remote devices such as IP based sur-
veillance cameras or signaling equipment in a
non-climate controlled enclosure. Deliver
100Mbps data access in residential or commer-
cial environments inside a non-climate controlled
pedestal enclosure.
This converter can also be deployed in industrial
environments where excessive heat may be a
concern. (Note that this device is rated to meet
“temperature” requirements of industrial envi-
ronments only.)
E-100BTX-FX-05(xxHT)
stand-alone media converter
Fast Ethernet 100BASE-TX to 100BASE-FX
Extended Temperature
Fast Ethernet Media Converter
Features

Extended Temperature Capable:
Designed to operate in environments
where ambient temperatures can rise as
high as 65°C (149°F).

Auto-Negotiation

AutoCross™

Link Pass Through

Far-End-Fault Detection

Automatic Link Restoration

Pause
Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: [phone]
fax: [phone]
[e-mail]
http://www.transition.com
©2009 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.