User's Manual Part 2

2-25Operating Your Tablet Computer
9. If you select “Type in manually the bluetooth address of my scanner”,
the screen below is displayed. Type the Bluetooth address of the barcode
scanner, then tap Ok.
10. Once connected, you may start scanning barcodes using the Bluetooth
scanner.
Pairing the Bluetooth scanner with the Tablet Computer is only done when
connecting for the rst time. The Tablet Computer saves the scanner prole and
automatically connects with it when and the Bluetooth scanner is in range and
the Bluetooth feature is enabled in the Tablet Computer.
Connecting an External Barcode Scanner
You may connect an external barcode scanner to the RS-232 port of your Tablet
Computer.
1. Connect the RS232 connector of the barcode scanner to the RS232 port
of your Tablet Computer.
2. Activate SmartWedgeLite on your Tablet Computer (see “To activate
SmartWedgeLite” on page 2-22).
3. Tap and hold the SmartWedgeLite ( ) icon on the taskbar.
4. On the pop-up menu, tap Add\Remove scanner.