User's Manual Part 1

1-11Getting Started
Installing the Stylus
Your Tablet Computer comes with a stylus for use with the touch screen.
The stylus holder at the bottom of the Tablet Computer provides a convenient
place to store the stylus.
Perform the following to prepare and install the stylus to your Tablet Computer:
1. Loop one end of the tether to the stylus eyelet.
2. Loop the other end of the tether to the Tablet Computer eyelet.
2
1
3. Insert the stylus into the stylus holder until it locks into place.
Removing the Stylus
Pull the stylus by its tab to remove it from the stylus holder.