User Manual

19
STEP 3. Swap Your Drives
After Transcend SSD System Clone has successfully cloned your data onto the new SSD, please shut down your
computer, take out the current storage device and replace with the new SSD.
1. Make sure your computer is powered off.
2. Remove the original hard drive from your desktop or laptop, and install the new SSD.
3. Replace any removed covers and boot up your computer.
10. Firmware Update
1. Select “FW UPDATE” tab on the left sidebar.
2. Choose the Transcend SSD you want to update firmware on the upper “Drive” text box.
3. The firmware version number will shown under the Upgrade block.
4. If the firmware version is up-to-date, the “Download” button will be greyed out.
5. Click the download button if your firmware version is not the latest one. The file is stored on
“D:\Transcend_SSD_FW_Update_Package” by default. If you don't have (D:) partition, the destination will be
“C:\Transcend_SSD_FW_Update_Package”.