User Manual

16
If your new SSD has smaller capacity than your current hard drive:
Example A:
New SSD = 128GB, current HDD = 160GB, OS Partition (C:) = 20GB.
In this configuration, System Clone will only clone the OS partition. You must manually back up other partitions
in the HDD.
Example B:
New SSD = 128GB, current HDD = 160GB, OS Partition (C:) = 150GB with occupied 140GB
System Clone does not support this configuration. The occupied capacity of
OS partition on the HDD must be smaller than the capacity of the SSD to successfully clone disk.
Example C:
New SSD = 128GB, current HDD = 160GB, OS Partition (C:) = 150GB with occupied 100GB
System Clone will clone the 100GB data from the current HDD to the new SSD. Available storage space of the
new SSD might not be enough to back up other files from the HDD after the deduction of occupied capacities.
Therefore, you are recommended to purchase a higher capacity SSD to back up larger files.
If your new SSD has the same or larger capacity than your current hard drive:
Transcend System Clone will clone the entire disk (including all partitions) to the new SSD. Additionally,
Transcend System Clone provides an option to Extend Disk to occupy the full capacity of the new SSD.