User Manual

12
8. Secure Erase
NOTE:
- Executing Secure Erase will permanently remove ALL data stored on ALL disk partitions of the SSD. Erasing a
single disk partition is not possible.
- Secure Erase is not supported by Windows 8 or later.
- To prevent compatibility issues when using Secure Erase on a SATA III SSD, we recommend connecting the
SSD to a native Intel SATA III port.
1. Select “TOOL” tab on the left sidebar.
2. Choose the Transcend SSD on the upper “Drive” text box.
3. Click “Full Erase” button under Erase block.