Data Sheet

ManualsBrandsTranscend ManualsBuilt-in SSDsSSD430K 512 GB 2.5" (6.35 cm) internal SSD SATA 6 Gbps Retail

SSD430K –

SATA III 6Gb/s SSD

Due to Ultra-slim (fit the standard dimensions of 2.5”

SATA Hard Disk Drives), huge capacity, SATA 6Gb/s

speed, and low power consumption, Solid State Drive

is the perfect replacement storage device for PCs,

Ultrabooks, Laptops, gaming systems, and hand-held

devices.

Features

 Advanced Global Wear-Leveling and Block

management for reliability

 Supports Advanced Garbage Collection

 Built-in LDPC ECC (Error Correction Code)

functionality

 Supports DEVSLP mode (optional)

 Supports Enhanced S.M.A.R.T. Function

 RoHS compliant

 Provides great shock resistance

 Bad Block Management



Advanced

Garbage

Collection

 Non-volatile Flash Memory for outstanding

data retention



Supports Trim and NCQ command

Summary of content (15 pages)

PAGE 1
SSD430K – SATA III 6Gb/s SSD Due to Ultra-slim (fit the standard dimensions of 2.5” SATA Hard Disk Drives), huge capacity, SATA 6Gb/s speed, and low power consumption, Solid State Drive is the perfect replacement storage device for PCs, Ultrabooks, Laptops, gaming systems, and hand-held devices.
PAGE 2
Specifications Physical Specification Form Factor 2.5 inch Storage Capacities 64 / 128 / 256 / 512 GB Dimensions Length 100.00 ± 0.25 mm 3.937 ± 0.01 inch Width 69.85 ± 0.25 mm 2.750 ± 0.01 inch Height 6.8 ± 0.2 mm 0.268 ± 0.
PAGE 3
Power Requirements Input Voltage 5V ± 5% @ 25 oC Mode P/N / Power Consumption Typical (W) DEVSLP TS64GSSD430K TS128GSSD430K TS256GSSD430K TS512GSSD430K 5 (mW) Max Write* 1.6 Max Read* 1.4 Idle* 0.5 Max Write* 2 Max Read* 1.8 Idle* 0.6 Max Write* 2.1 Max Read* 2.1 Idle* 0.6 Max Write* 2.5 Max Read* 2.3 Idle* 0.6 Power on to Ready Power on to Ready 0.22s Note: 1. Using Drive Master and power on to ready with proper shutdown condition 2.
PAGE 4
Package Dimensions The figure below illustrates the Transcend 2.5” SATA Solid State Drive. All dimensions are in mm. *Note: Tighten mounting screws with no more than 2 Kgf-cm of torque.
PAGE 5
Pin Assignments Pin Layout Pin No. Pin Name Pin No.
PAGE 6
Block Diagram
PAGE 7
Features • Global Wear Leveling – Advanced algorithm to enhance the Wear-Leveling Efficiency Global wear leveling ensures that every block has an even erase count. This helps to extend the life expectancy • Advanced Garbage Collection Transcend’s SSDs have a perfect garbage collection mechanism to help improve performance. Advanced Garbage collection can efficiently improve memory management to ensure the SSD’s stable performance.
PAGE 8
ATA Command Register This table with the following paragraphs summarizes the ATA command set.
PAGE 9
Capacity 02h Supported Capabilities 03h Current Settings 04h ATA Strings 05h Security 06h Serial ATA 08h Write Sectors 30h Write Sectors Ext 34h Write DMA Ext 35h Set Max Address Ext 37h Write Multiple Ext 39h Write DMA FUA Ext 3Dh Write Log Ext 3Fh Selective Self-Test log(SMART) 09h Host Specific(SMART) 80h~9Fh SCT Command/Status(SCT) E0h SCT Data Transfer(SCT) E1h Read Verify Sectors 40h Read Verify Sectors (w/o retry) 41h Read Verify Sectors Ext 42h Write Uncorrect
PAGE 10
Download with offsets and save microcode for future use / 0Eh/0Fh Activate downloaded microcode SMART B0h Read Data D0h Read Thresholds D1h Enable/Disable Attr Autosave D2h Exec Off-line Immediate D4h Execute Off-Line routine 00h Execute Short Self-test routine (Off-Line) 01h Execute Extended Self-test routine (Off-Line) 02h Abort Off-Line Self-test routine 7Fh Execute Short Self-test routine (Captive) 81h Execute Extended Self-test routine (Captive) 82h Sanitize Device Read Log Sect
PAGE 11
Idle Immediate E1h Standby E2h Idle E3h Read Buffer E4h Check Power Mode E5h Sleep E6h Flush Cache E7h Write Buffer E8h Flush Cache Ext EAh Identify Device ECh Set Features EFh Security Set Password F1h Security Unlock F2h Security Erase Prepare F3h Security Erase Unit F4h Security Freeze Lock F5h Security Disable Password F6h Read Native Max Address F8h Set Max Address F9h Set Max Set Password 01h Set Max Lock 02h Set Max Unlock 03h Set Max Freeze Lock 04h Set
PAGE 12
SMART Data Structure BYTE F/V Description 0-1 X Revision code 2-361 X Vendor specific 362 V Off-line data collection status 363 X Self-test execution status byte 364-365 V Total time in seconds to complete off-line data collection activity 366 X Vendor specific 367 F Off-line data collection capability 368-369 F 370 F SMART capability Error logging capability 7-1 Reserved 0 1=Device error logging supported 371 X Vendor specific 372 F Short self-test routine recommended poll
PAGE 13
SMART Attributes The following table shows the vendor specific data in byte 2 to 361 of the 512-byte SMART data Attribute ID (hex) Raw Attribute Value Attribute Name 01 MSB 00 00 00 00 00 00 Read Error Rate 05 LSB MSB 00 00 00 00 00 Reallocated sectors count 09 LSB - - MSB 00 00 00 Power-on hours 0C LSB - - MSB 00 00 00 Power Cycle Count A0 LSB - - MSB 00 00 00 Uncorrectable sectors count when read/write A1 LSB MSB 00 00 00 00 00 Number of valid spare
PAGE 14
Ordering Information Capacity Model P/N 64GB TS64GSSD430K 128GB TS128GSSD430K 256GB TS256GSSD430K 512GB TS512GSSD430K The technical information above is based on industry standard data and has been tested to be reliable. However, Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. Transcend reserves the right to make changes to the specifications at any time without prior notice.
PAGE 15
Revision History Version Date Modification Content V1.0 V1.1 2018/04/11 Initial Release 2018/11/12 Update DWPD V1.