User’s Manual 3.5" External Hard Drive StoreJet® 35T3 (Version 1.
Table of Contents Introduction︱ ︱ ......................................................................................1 Package Contents︱ ︱ ............................................................................1 Features︱ ︱ ............................................................................................2 System Requirements︱ ︱ .....................................................................2 Safety Precautions︱ ︱ .....................................................................
Introduction︱ Congratulations on purchasing Transcend’s StoreJet 35T3. This stylish, versatile, high-speed USB storage device is the perfect data management system for uploading, downloading, storing and transferring your vital data and information. With its One Touch auto-backup button and real-world transfer speeds up to 3X faster than USB 2.0 (in USB 3.0 mode), the compact StoreJet 35T3 is quick and easy way to store and back-up essential files, folders, documents, photos, music and videos.
Features︱ SuperSpeed USB 3.0 compliant and backwards compatible with USB 2.
Safety Precautions︱ These usage and safety guidelines are IMPORTANT! Please follow them carefully. General Use • Unpack the contents of the StoreJet 35T3 package carefully. • Avoid exposing your StoreJet 35T3 to extreme temperatures above 55℃ or below 5℃ during operation. • Never drop your StoreJet 35T3. • Never allow your StoreJet 35T3 to come in contact with water or any other liquids. • Never use a damp/wet cloth to wipe or clean the exterior case.
Power • The StoreJet 35T3 is powered from your home’s power outlet using the included power adapter. Do not use any other power adapter with the StoreJet 35T3. • Ensure nothing is resting on the power or USB cable and that the cables are not located where they can be tripped over or stepped on. Reminders • Always follow the procedures in the “Disconnecting from a Computer” section to remove the StoreJet from your computer.
Product Overview︱ A OneTouch Backup Button B LED Indicator C Anti-slip Rubber Feet D DC Power Input Jack E USB Port F Security Lock Attachment 5
Connecting to a Computer︱ 1. Attach the included 2-pin or 3-pin (country/region dependant) power connector to the USB Power Adapter by sliding it until it clicks into place. 2. Connect the Power Adapter cord to the round-shaped DC IN jack on the back of the StoreJet 35T3 and plug the Power Adapter into your home’s power outlet. 3. Plug the square end (1) of the USB 3.0 cable into the USB port on the StoreJet 35T3. USB 3.0 Type-B Connector USB 2.0 / 3.0 Connector USB 3.
5. When the StoreJet 35T3 is successfully connected to a computer, its LED will light up. In Windows, a new Local Disk drive with a newly-assigned drive letter will appear, and a Removable Hardware icon will appear on the Windows System Tray. The StoreJet 35T3’s internal hard drive comes pre-formatted to FAT32, which is compatible with most computer systems, including Windows, Mac, Linux, and more. • • Computers running Windows and Mac OS will automatically detect and install the StoreJet 35T3.
*G: is an example drive letter, the drive letter in your Windows computer may differ Note: “New Volume” is an example drive. The drive name on your Mac computer may differ 6. Once connected, you can use the StoreJet 35T3 as an external hard drive to transfer data to and from your computer. Simply drag and drop files or folders onto the Local Disk, Volume, or Drive Letter that represents the StoreJet 35T3.
One Touch Auto-backup Button︱ ︱ The StoreJet 35T3 is equipped with a convenient One Touch auto-backup button that you can use to instantly backup and synchronize your data. Installing the StoreJet Elite software enables the Auto-backup button, along with useful data-management tools and 256bit AES file security. Simply run the “sjelite3.exe” file in the root directory of your StoreJet drive to get started. StoreJet Elite is also available for download on the Transcend website.
Disconnecting from a Computer︱ NEVER disconnect the StoreJet from a Computer when its LED is flashing. Windows® 1. Select the Hardware icon on the system tray. 2. The Safely Remove Hardware pop-up window will appear. Select it to continue. 3. A window will appear stating, “The ‘USB Mass Storage Device’ device can now be safely removed from the system.
Linux® Execute umount /mnt/Storejet to un-mount the device. Then unplug your StoreJet 35T3 from the USB port.
Formatting the Hard Drive︱ The StoreJet 35T3 comes pre-formatted to the FAT32 file system, which is compatible with ® ® ® virtually any computer system, including all versions of Windows , Mac , and Linux . If you plan to use your StoreJet drive on various different types of computers, game consoles, or media playback devices, we recommend keeping the existing FAT32 file system. However, if you plan to store large files that exceed 4GB in size, you will need to format the drive to a different file system.
7. Press “Start.” 8. A confirmation window will appear. Press OK to begin formatting the drive. 9. The format process may take a few minutes. When complete, an “O.K.” message will appear in the bottom right hand corner of the window. 10. Click the “Close” button to finish and exit. Windows® 7/Vista 1. Download the StoreJet Format Utility from Transcend’s online Download Center at www.transcend.com.tw/downloads 2.
drive (not the StoreJet 35T3). 3. Plug the StoreJet 35T3 into an available USB port on your Windows 7/Vista computer. 4. Unplug all other USB storage devices from your computer. This is to prevent accidental format of a different USB drive. 5. Right-click “StoreJetFormatter.exe” and select “Run as Administrator.” 6. The User Account Control window will appear. Select “Allow” to continue. 7. In the StoreJet Format Utility window, click the “Refresh” button. 8.
9. Press “Start”.
10. A confirmation window will appear. Press OK to begin formatting the drive 11. The format process may take a few minutes. When complete, an “O.K.” message will appear in the bottom right-hand corner of the window. 12. Click the “Close” button to finish and exit. Mac® OS 1. Plug the StoreJet 35T3 into an available USB port on your MAC computer. 2. Unplug all other external storage devices from your computer. This is to prevent accidental format of a different drive. 3.
7. Input a name for your new drive (otherwise, your drive will be named “Untitled”) 8. Click the “Erase” button in the bottom right corner of the window 9. Click “Erase” again to confirm.
10. Click the “Close” button to finish and exit. Linux® 1. Plug the StoreJet 35T3 into an available USB port on your Linux computer. 2. Unplug all other USB storage devices from your computer. This is to prevent accidental format of a different USB drive. 3. Type fdisk /dev/sda (replace /dev/sda with your actual USB device) 4. Press p 5. Press n 6. Press w 7. Type mkfs.ext3 /dev/sda1 8. Go to /etc/fstab and add: /dev/sda1 /mnt/usbdrive auto user,noauto 0 0 9. Type mkdir /mnt/usbdrive 10.
Troubleshooting︱ If a problem occurs with your StoreJet 35T3, please first check the information listed below before taking your StoreJet 35T3 in for repair. If you are unable to remedy a problem after trying the following suggestions, please consult your dealer, service center, or local Transcend branch office. We also have FAQ and Support services on our website at www.transcend.com.tw. My operating system cannot detect the StoreJet 35T3 Check the following: 1.
not support large files that exceed 4GB in size. If you plan to store large files that are larger than 4GB, you will need to convert the drive to a different file system such as NTFS. Please see the “Formatting the Hard Drive” section of this manual for instructions how to re-format the StoreJet 35T3.
Recycling & Environmental Considerations︱ ︱ Recycling the Product (WEEE): Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products.
StoreJet® 35T3 Specifications︱ Size (L x W x H) 152.40mm × 44.80mm × 172.40mm Weight 1040g Storage Media 3.5" SATA Hard Disk Drive AC input: 100V-240V Power Supply DC input: 12V/2A via Switching Power Adapter USB 3.0: Up to 5Gb/s Transfer Speed USB 2.
Transcend Limited Warranty︱ “Above and Beyond” is the standard we set ourselves for customer service at Transcend. We consistently position ourselves to be significantly above the industry norm, which is all part of our commitment to Customer Satisfaction. Please do not break or remove the warranty sticker on your Transcend products, as this will void your product warranty. All Transcend information, Inc.
