Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess Description Features • RoHS compliant product. Transcend High Capacity microSD Card series are specifically designed to meet the High Capacity, High • Operating Voltage: 2.7 ~ 3.6V Definition Audio and Video requirement for the latest • Operating Temperature: -25 ~ 85°C Digital Cameras, DV Recorders, Mobile Phones, etc.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess Architecture Transcend Information Inc.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess Bus Operating Conditions • General Parameter Symbol Peak voltage on all lines Min. Max. Unit -0.3 VDD+0.3 V -10 10 µA -10 10 µA Min. Max. Unit 3.6 V Remark All Inputs Input Leakage Current All Outputs Output Leakage Current • Power Supply Voltage Parameter Symbol Supply voltage VDD 2.7 Output High Voltage VOH 0.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess Single card capacitance CCARD Maximum signal line inductance Pull-up resistance inside card (pin1) RDAT3 10 10 pF 16 nH fPP ≤ 20 MHz 90 kΩ May be used for card detection Note that the total capacitance of CMD and DAT lines will be consist of CHOST, CBUS and one CCARD only because they are connected separately to the SD Memory Card host.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess • Bus Signal Levels As the bus can be supplied with a variable supply voltage, all signal levels are related to the supply voltage. To meet the requirements of the JEDEC specification JESD8-1A and JESD8-7, the card input and output voltages shall be within the following specified ranges for any VDD of the allowed voltage range: Parameter Symbol Min. Output HIGH voltage VOH 0.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess • Bus Timing Parameter Symbol Min Max.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess • Bus Timing (High Speed Mode) Parameter Symbol Min Max.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess Reliability and Durability Temperature Operation: -25°C / 85°C Storage: -40°C (168h) / 85°C (500h) Junction temperature: max. 95°C Moisture and corrosion Operation: 25°C / 95% rel. humidity Storage: 40°C / 93% rel. hum./500h Salt Water Spray: 3% NaCl/35C; 24h acc. MIL STD Method 1009 Durability 10.000 mating cycles; Bending 10N Torque 0.15N.m or +/-2.5 deg Drop test 1.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess Register Information Within the card interface six registers are defined: OCR, CID, CSD, RCA, DSR and SCR. These can be accessed only by corresponding commands. The OCR, CID, CSD and SCR registers carry the card/content specific information, while the RCA and DSR registers are configuration registers storing actual configuration parameters. 1.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess OCR Register Definition 1) This bit is valid only when the card power up status bit is set. 2) This bit is set to LOW if the card has not finished the power up routine. A voltage range is not supported if the corresponding bit value is set to LOW. As long as the card is busy, the corresponding bit (31) is set to LOW. 2. CID Register The Card IDentification (CID) register is 128 bits wide.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess • PRV The product revision is composed of two Binary Coded Decimal (BCD) digits, four bits each, representing an “n.m” revision number. The “n” is the most significant nibble and “m” is the least significant nibble. As an example, the PRV binary value field for product revision “6.2” will be: 0110 0010 • PSN The Serial Number is 32 bits of binary number.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess The CSD Register Fields (CSD Version 2.0) The following sections describe the CSD fields and the relevant data types. If not explicitly defined otherwise, all bit strings are interpreted as binary coded numbers starting with the left bit first. • CSD_STRUCTURE Field structures of the CSD register are different depend on the Physical Specification Version and Card Capacity.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess CSD_STRUCTURE CSD structure version Card Capacity 0 CSD Version 1.0 Standard Capacity 1 CSD Version 2.0 High Capacity and Extended Capacity 2-3 reserved CSD Register Structure • TAAC This field is fixed to 0Eh, which indicates 1 ms. The host should not use TAAC, NSAC, and R2W_FACTOR to calculate timeout and should uses fixed timeout values for read and write operations.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess Note that for current SD Memory Cards that field must be always 0_0110_010b (032h) which is equal to 25MHz - the mandatory maximum operating frequency of SD Memory Card. In High-Speed mode, that field must be always 0_1011_010b (05Ah) which is equal to 50MHz. And when the timing mode returns to the default by CMD6 or CMD0 command, its value will be 032h.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess • READ_BLK_MISALIGN This field is fixed to 0, which indicates read access crossing physical block boundaries is always disabled in High Capacity SD Memory Card. • DSR_IMP Defines if the configurable driver stage is integrated on the card. If set, a driver stage register (DSR)must be implemented also.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess This field is fixed to 9h, which indicates WRITE_BL_LEN=512 Byte. • WRITE_BL_PARTIAL This field is fixed to 0, which indicates partial block read is inhibited and only unit of block access is allowed. • FILE_FORMAT_GRP This field is set to 0. Host should not use this field. • COPY Defines if the contents is original (= ‘0’) or has been copied (=’1’).
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess Transcend Information Inc.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess 4. RCA Register The writable 16-bit relative card address register carries the card address that is published by the card during the card identification. This address is used for the addressed host-card communication after the card identification procedure. The default value of the RCA register is 0x0000. The value0x0000 is reserved to set all cards into the Stand-by State with CMD7. 5.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess • SCR_STRUCTURE Version number of the related SCR structure in the SD Memory Card Physical Layer Specification. SCR_STRUCTURE SCR structure version SD Physical Layer Specification Version 0 SCR version 1.0 Version 1.01-3.00 1-15 reserved SCR Register Structure Version • SD_SPEC Describes the SD Memory Card Physical Layer Specification version supported by this card.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess Essential conditions to indicate Version 2.00 Card (SD_SPEC=2 and SD_SPEC3=0) (1) The card shall support CMD6 (2) The card shall support CMD8 (3) The card shall support CMD42 (4) User area capacity shall be up to 2GB (SDSC) or 32GB (SDHC) (5) Speed Class shall be supported (SDHC) Essential conditions to indicate Version 3.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess • SD_SECURITY This field indicates CPRM Security Specification Version for each capacity card. The definition of Protected Area is different in each capacity card. SD_SECURITY CPRM Security Version 0 No Security 1 Not Used 2 SDSC Card (Security Version 1.01) 3 SDHC Card (Security Version 2.00) 4 SDXC Card (Security Version 3.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess Mechanical Dimension Mechanical Description: Top View Transcend Information Inc.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess Mechanical Description: Bottom View Transcend Information Inc.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess Mechanical Description: Keep Out Area Transcend Information Inc.
Ver 1.1 4~16G High Capacity microSD Card m miiccrro oS SD DH HC C1100 C Caarrd d sseerriieess microSD package: Dimensions Transcend Information Inc.