User's Manual

ManualsBrandsTranscend ManualsCamera AccessoriesTranscend TS32GSDHC 6

4~32GB High Capacity Secure Digital Card

Transcend Information Inc.

Description

Transcend High Capacity SD Card series are

specifically designed to meet the High Capacity, High

Definition Audio and Video requirement for the latest

Digital Cameras, DV Recorders, Mobile Phones, etc,.

The new defined Speed Class enables the host to

support AV applications to perform real time

recording to the SD memory card.

Placement

Front Back

Features

• RoHS compliant product.

• Card Lid material: PC (comply with UL94,Flame

Class:HB)

• Operating Voltage: 2.7 ~ 3.6V

• Operating Temperature: -25 ~ 85°C

• Durability: 10,000 insertion/removal cycles

• Compatible with SD Specification Ver. 2.0

• Comply with SD File System Specification Ver. 2.0

• Mechanical Write Protection Switch

• Supports Speed Class Specification up to Class 6

• Supports Copy Protection for Recorded Media (CPRM)

for SD-Audio

• Seamless compatibility with SDMI-compliant digital audio

devices

• Form Factor: 24mm x 32mm x 2.1mm

Pin Definition

SD Mode SPI Mode

Pin No.

Name Type Description Name Type Description

CD/DAT

I/O/PP

Card Detect/Data Line [Bit3]

CS I

Chip Select (neg true)

CMD PP Command/Response

DI I

Data In

SS1

S Supply voltage ground

VSS S

Supply voltage ground

S Supply voltage

VDD S

Supply voltage

CLK I Clock

SCLK I

Clock

SS2

S Supply voltage ground

VSS2 S

Supply voltage ground

DAT0 I/O/PP Data Line [Bit0]

DO O/PP

Data Out

DAT1 I/O/PP Data Line [Bit1]

RSV

DAT2

I/O/PP Data Line [Bit2] RSV

Summary of content (24 pages)

PAGE 1
S SD DH HC CC Caarrd d sseerriieess 4~32GB High Capacity Secure Digital Card Description Features • RoHS compliant product. Transcend High Capacity SD Card series are specifically designed to meet the High Capacity, High • Card Lid material: PC (comply with UL94,Flame Definition Audio and Video requirement for the latest Class:HB) Digital Cameras, DV Recorders, Mobile Phones, etc,. • Operating Voltage: 2.7 ~ 3.
PAGE 2
S SD DH HC CC Caarrd d sseerriieess 4~32GB High Capacity Secure Digital Card Architecture Transcend Information Inc.
PAGE 3
S SD DH HC CC Caarrd d sseerriieess 4~32GB High Capacity Secure Digital Card Bus Operating Conditions • General Parameter Symbol Min. Max. Unit -0.3 VDD+0.3 V -10 10 µA -10 10 µA Symbol Min. Max. Unit Supply voltage VDD 2.7 3.6 V Output High Voltage VOH 0.75* VDD Output Low Voltage VOL Input High Voltage VIH Input Low Voltage VIL Peak voltage on all lines Remark All Inputs Input Leakage Current All Outputs Output Leakage Current • Power Supply Voltage Parameter 0.
PAGE 4
S SD DH HC CC Caarrd d sseerriieess Single card capacitance 4~32GB High Capacity Secure Digital Card CCARD Maximum signal line inductance Pull-up resistance inside card (pin1) RDAT3 10 10 pF 16 nH fPP ≤ 20 MHz 90 kΩ May be used for card detection Note that the total capacitance of CMD and DAT lines will be consist of CHOST, CBUS and one CCARD only because they are connected separately to the SD Memory Card host.
PAGE 5
S SD DH HC CC Caarrd d sseerriieess 4~32GB High Capacity Secure Digital Card • Bus Signal Levels As the bus can be supplied with a variable supply voltage, all signal levels are related to the supply voltage. To meet the requirements of the JEDEC specification JESD8-1A and JESD8-7, the card input and output voltages shall be within the following specified ranges for any VDD of the allowed voltage range: Parameter Symbol Min. Output HIGH voltage VOH 0.
PAGE 6
S SD DH HC CC Caarrd d sseerriieess 4~32GB High Capacity Secure Digital Card • Bus Timing Parameter Symbol Min Max.
PAGE 7
S SD DH HC CC Caarrd d sseerriieess Output Delay time during Data Transfer Mode 4~32GB High Capacity Secure Digital Card tODLY 0 14 ns CL ≤ 40 pF, (1 card) Output Delay time during Identification Mode tODLY 0 50 ns CL ≤ 40 pF, (1 card) (1) 0 Hz means to stop the clock. The given minimum frequency range is for cases were continues clock is required Transcend Information Inc.
PAGE 8
S SD DH HC CC Caarrd d sseerriieess 4~32GB High Capacity Secure Digital Card • Bus Timing (High Speed Mode) Parameter Symbol Min Max.
PAGE 9
S SD DH HC CC Caarrd d sseerriieess Output Delay time during Data Transfer Mode Output Hold time 4~32GB High Capacity Secure Digital Card tODLY 14 tOH 2.5 1 Total System capacitance for each line CL 1) In order to satisfy severe timing, host shall drive only one card. Transcend Information Inc.
PAGE 10
S SD DH HC CC Caarrd d sseerriieess 4~32GB High Capacity Secure Digital Card Reliability and Durability Temperature Operation: -25°C / 85°C Storage: -40°C (168h) / 85°C (500h) Junction temperature: max. 95°C Moisture and corrosion Operation: 25°C / 95% rel. humidity Storage: 40°C / 93% rel. hum./500h Salt Water Spray: 3% NaCl/35C; 24h acc. MIL STD Method 1009 Durability 10.000 mating cycles; test procedure: tbd. Bending 10N Torque 0.15N.m or +/-2.5 deg Drop test 1.
PAGE 11
S SD DH HC CC Caarrd d sseerriieess 4~32GB High Capacity Secure Digital Card Register Information Within the card interface six registers are defined: OCR, CID, CSD, RCA, DSR and SCR. These can be accessed only by corresponding commands (see Chapter 4.7). The OCR, CID, CSD and SCR registers carry the card/content specific information, while the RCA and DSR registers are configuration registers storing actual configuration parameters. 1.
PAGE 12
S SD DH HC CC Caarrd d sseerriieess 4~32GB High Capacity Secure Digital Card 1) This bit is valid only when the card power up status bit is set. 2) This bit is set to LOW if the card has not finished the power up routine. The supported voltage range is coded as shown in Table 5-1. A voltage range is not supported if the corresponding bit value is set to LOW. As long as the card is busy, the corresponding bit (31) is set to LOW. 2. CID Register The Card IDentification (CID) register is 128 bits wide.
PAGE 13
S SD DH HC CC Caarrd d sseerriieess 4~32GB High Capacity Secure Digital Card The product revision is composed of two Binary Coded Decimal (BCD) digits, four bits each, representing an “n.m” revision number. The “n” is the most significant nibble and “m” is the least significant nibble. As an example, the PRV binary value field for product revision “6.2” will be: 0110 0010 • PSN The Serial Number is 32 bits of binary number.
PAGE 14
S SD DH HC CC Caarrd d sseerriieess 4~32GB High Capacity Secure Digital Card The CSD Register Fields (CSD Version 2.0) The following sections describe the CSD fields and the relevant data types. If not explicitly defined otherwise, all bit strings are interpreted as binary coded numbers starting with the left bit first. • CSD_STRUCTURE Field structures of the CSD register are different depend on the Physical Specification Version and Card Capacity.
PAGE 15
S SD DH HC CC Caarrd d sseerriieess 4~32GB High Capacity Secure Digital Card CSD Register Structure • TAAC This field is fixed to 0Eh, which indicates 1 ms. The host should not use TAAC, NSAC, and R2W_FACTOR to calculate timeout and should uses fixed timeout values for read and write operations (See 4.6.2). • NSAC This field is fixed to 00h. NSAC should not be used to calculate time-out values.
PAGE 16
S SD DH HC CC Caarrd d sseerriieess 4~32GB High Capacity Secure Digital Card Note that for current SD Memory Cards that field must be always 0_0110_010b (032h) which is equal to 25MHz - the mandatory maximum operating frequency of SD Memory Card. In High-Speed mode, that field must be always 0_1011_010b (05Ah) which is equal to 50MHz. And when the timing mode returns to the default by CMD6 or CMD0 command, its value will be 032h.
PAGE 17
S SD DH HC CC Caarrd d sseerriieess 4~32GB High Capacity Secure Digital Card • C_SIZE This field is expanded to 22 bits and can indicate up to 2 TBytes (It is the same as the maximum memory space specified by a 32-bit block address.) This parameter is used to calculate the user data area capacity in the SD memory card (not include the protected area).
PAGE 18
S SD DH HC CC Caarrd d sseerriieess 4~32GB High Capacity Secure Digital Card • COPY Defines if the contents is original (= ‘0’) or has been copied (=’1’). The COPY bit for OTP and MTPdevices, sold to end consumers, is set to ‘1’ which identifies the card contents as a copy. The COPY bit is an one time programmable bit. • PERM_WRITE_PROTECT Permanently protects the whole card content against overwriting or erasing (all write and erase commands for this card are permanently disabled).
PAGE 19
S SD DH HC CC Caarrd d sseerriieess 4~32GB High Capacity Secure Digital Card 4. RCA Register The writable 16-bit relative card address register carries the card address that is published by the card during the card identification. This address is used for the addressed host-card communication after the card identification procedure. The default value of the RCA register is 0x0000. The value0x0000 is reserved to set all cards into the Stand-by State with CMD7. 5.
PAGE 20
S SD DH HC CC Caarrd d sseerriieess 4~32GB High Capacity Secure Digital Card 0x404. 6. SCR Register In addition to the CSD register there is another configuration register that named - SD CARD Configuration Register (SCR). SCR provides information on SD Memory Card's special features that were configured into the given card. The size of SCR register is 64 bit. This register shall be set in the factory by the SD Memory Card manufacturer. The following table describes the SCR register content.
PAGE 21
S SD DH HC CC Caarrd d sseerriieess 4~32GB High Capacity Secure Digital Card Defines the data status after erase, whether it is ‘0’ or ‘1’ (the status is card vendor dependent). • SD_SECURITY Describes the security algorithm supported by the card. SD Supported Security Algorithm Note that it is mandatory for a regular writable SD Memory Card to support Security Protocol. For ROM (Read Only) and OTP (One Time Programmable) types of the SD Memory Card, the security feature is optional.
PAGE 22
S SD DH HC CC Caarrd d sseerriieess 4~32GB High Capacity Secure Digital Card Mechanical Dimension Transcend Information Inc.
PAGE 23
S SD DH HC CC Caarrd d sseerriieess Transcend Information Inc.
PAGE 24
S SD DH HC CC Caarrd d sseerriieess Transcend Information Inc.