SATA III 2280 M.2 SSD MTS800I Datasheet Products Product Description TS1TMTS800I M.2 2280 SSD, SATA3 B+M Key, MLC, Wide Temp TS512GMTS800I TS256GMTS800I Datasheet version TS128GMTS800I 1.1 TS64GMTS800I TS32GMTS800I TS16GMTS800I No.70, Xingzhong Rd., Neihu Dist.,Taipei City 114, Taiwan, R.O.C. Tel:+886-2-2792-8000 Fax:+886-2-2792-1614 www.transcend-info.com Copyright© Transcend Information, Inc. All Rights Reserved.
Revision History Revision No. History Released Date Editor by 1.0 First version (WD 15nm) 2019/12/26 TSD 1.1 Revise 2.3 System Performance : 128GB Vibration Format Updated Add 2.6 Recommended Measurement Point Revise 5.2.
Transcend MTS800I Features Part Name Capacity TS1TMTS800I 1TB TS512GMTS800I 512GB TS256GMTS800I 256GB TS128GMTS800I 128GB TS64GMTS800I 64GB TS32GMTS800I 32GB TS16GMTS800I 16GB FEATURES RELIABILITY1) SATA 6Gbps 2D MLC NAND Flash Wide-temperature operation M.
POWER REQUIREMENTS1) Supply voltage / Tolerance 3.3V±5% Active (max) Idle (max) 2.64W 0.41W PHYSICAL DIMENSION Width Length 22.00±0.15mm 80.00±0.15mm Height(max) Weight 3.58mm Up to 9g Note: 1) For detail information, please refer to document content.
Table of Content 1 Introduction……………………..………..………………………….…..……………….…………………………………..6 1.1 General Feature Information……………………………………………………………….……………….6 1.2 Product List…………………………………………..………………………………………………..……………6 1.3 Ordering Information…………………..………………..…………………………………………….………7 2 Product Specifications…………………………………………………….……………..………………………………..8 2.1 Interface and Compliance……………….……………………………………………………….…….……8 2.2 Drive Capacity…………………………………...………………………………………………………….…..…8 2.
1. Introduction 1.1 General Feature Information Hardware Feature - SATA 6Gbps - Transcend Controller TS6500 - 2D MLC NAND Flash - Wide-temperature operation from -40°C to 85°C - M.2 SATA 2280 B+M Key Embedded DDR3 DRAM cache Power shield function AES-256 function (Optional) Firmware Feature - Global wear-leveling function - Enhance Bad block management function - BCH ECC(Error Correction Code) function - TRIM Command function - Advanced Garbage Collection function - StaticDataRefresh function - S.M.A.R.T.
1.3 Ordering Information TSXXXGMTS800I 1 2 3 4 1 – Transcend 2 – SSD Density 3 – G: Gigabyte; T: Terabyte 4 – M.
2. Product Specifications 2.1 Interface and Compliance - SATA3, compatible to SATA2 and SATA1 Compatible with ATA/ATAPI-7 Standard Native Command Queuing(NCQ) Command Set RoHS Compliance CE, FCC and BSMI Compliance 2.
[Table 3] Random Read / Write Performance Read / Write 16GB 32GB 64GB 128GB Random Read IOPS 13K 26K 50K 70K Random Write IOPS 6.
2.6 Environment Specifications [Table 6] Environment Specification Features Operating1) Temperature -40°C to +85°C 60°C/Hr Temperature Gradient Humidity Non-Operating2) -40°C to 85°C 60°C/Hr 5% to 95%, non-condensing 1500G, duration 0.5 ms, 3 axis3) Shock 20G, 7~2000Hz, 3 axis4) Vibration Note: 1) The operating specification is regarded as Ambient Temperature.
2.7 System Reliability [Table 7] Telcordia SR332 issue 4 MTBF Specifications Parameter 16GB 32GB 64GB MTBF 128GB 256GB 512GB 1TB 256GB 512GB 1TB 2,500,000 hours Note: 1) The calculation is based on 25°C. [Table 8] UBER Specifications Parameter 16GB 32GB 64GB 128GB 10-15 UBER Note: 1) Uncorrectable Bit Error Rate (UBER) is a metric for the rate of occurrence of data errors, equal to the number of data errors per bits read as specified in the JESD218 document of JEDEC standard.
[Table 13] Warranty Parameter 16GB 32GB 64GB 128GB Warranty 256GB 512GB 1TB 256GB 512GB 1TB 3 years limited [Table 14] Regulations Parameter 16GB 32GB 64GB 128GB Compliance CE, FCC and BSMI 12
3. Mechanical Specification The figure below illustrates the Transcend M.2 Type 2280-D2-B-M Solid State Drive. [Table 15] Physical Dimensions and Weight Model Height (mm) Width (mm) Length (mm) Weight (gram) 16GB/32GB/64GB/128GB/ 256GB/512GB/1TB Max 3.58 22.00±0.15 80.00±0.
4. Pin Assignments 4.1 Pin Assignments [Table 16] Pin Assignments Pin No. Pin Name 1) Pin No. Pin Name Pin No. Pin Name Pin No. Pin Name 02 3.3V 39 GND 40 NC 01 CONFIG_3 03 GND 04 3.
5. Block Diagram and Function Explanations 5.1 Block Diagram 5.2 Function Explanations 5.2.1 Global Wear Leveling Function Global wear leveling ensures that every block has an even erase count. This helps to extend the life expectancy of an SSD. There are three main processes in global wear leveling: (1) Record the block erase count and save this in the wear-leveling table. (2) Find the static-block and save this in the wear-leveling pointer.
5.2.4 StaticDataRefresh Technology Normally, ECC engine corrections are taken place without affecting the host normal operations. As time passes by, the number of error bits accumulated in the read transaction exceeds the correcting capability of the ECC engine, resulting in corrupted data being sent to the host.
5.2.8 TCG-Opal Function(Optional) Opal is a comprehensive set of guidelines. The target audience includes manufacturers of storage devices, software vendors, system integrators, and academia. These specifications cover the manufacture of storage devices, system setup, management, and use; they allow for password protection and hierarchical storage management, while preventing data from being stolen or tampered with.
6. Technology Term Explanations 6.1 TBW Terabytes Written (TBW) directly measures how much you can write cumulatively into the drive over its lifetime. Essentially, it just includes the multiplication conducted above in the measurement itself. For example, if your drive is rated for 365 TBW, that means you can write 365 TB into it before a replacement is required. If its warranty period is 5 years, that works out to 365 TB ÷ (5 years × 365 days/year) = 200 GB of writes per day.
7. Installation Requirements 7.1 Card Insertion Angles insertion is allowable and preferred; the intention is to minimize the insertion/extraction force. Minimum of angle of insertion is 5° Minimum two step insertion is desirable; the intention is to minimize the insertion/extraction force.
8. Command Descriptions 8.1 Support ATA Commands This table and the following paragraphs summarize the ATA command set.
SMART Disable Operations B0h Non-data SMART Enable/Disable Autosave B0h Non-data SMART Enable Operations B0h Non-data SMART Execute Off-Line Immediate B0h Non-data SMART Read LOG B0h PIO data-In SMART Read Data B0h PIO data-In SMART Read THRESHOLD B0h PIO data-In SMART Return Status B0h Non-data SMART SAVE ATTRIBUTE VALUES B0h Non-data SMART WRITE LOG B0h PIO data-out Read Native Max Address F8h Non-data Set Max Address F9h Non-data Set Max Set Password F9h PIO data-out
8.
8.3 SMART Attributes The following table shows the vendor specific data in byte 2 to 361 of 512-byte SMART data.
9. Contact Information JAPAN TAIWAN E-mail: sales-jp@transcend-info.com No.70, XingZhong Rd., NeiHu Dist., Taipei, Taiwan, R.O.C TEL +886-2-2792-8000 Fax +886-2-2793-2222 E-mail: sales-tw@transcend-info.com TEL: +81-3-5820-6000 KOREA E-mail: sales-kr@transcend-info.com TEL: +82-2-782-8088 GERMANY Shanghai E-mail: sales-de@transcend-info.com TEL: +49-40-538-907-0 E-mail: sales-cn@transcendchina.com TEL: +86-21-6161-9388 NETHERLANDS Beijing E-mail: sales-nl@transcend-info.
