Datasheet

2.5" SSDs
SATA III 6Gb/s SSD225S
Features
3D NAND flash
Engineered with a RAID engine and LDPC (Low-
Density Parity Check) coding to ensure data
integrity
Built-in SLC caching technology for exceptional
transfer speeds
Supports DevSleep ultra low power state,
S.M.A.R.T., TRIM, and NCQ commands
SSD Scope
SSD Scope features useful functions to
maintain your SSD in a healthy status and
also copy data from your original HDD to
Transcend's new SSD.
Specifications
Appearance
Dimensions 100 mm x 69.85 mm x 6.8 mm (3.94" x 2.75" x 0.28")
Weight 45 g (1.59 oz)
Interface
Bus Interface SATA III 6Gb/s
Storage
Flash Type 3D NAND flash
Capacity 250GB / 500 GB / 1 TB / 2 TB
Operating Environment
Operating Temperature 0°C (32°F) ~ 70°C (158°F)
Operating Voltage 5V±5%
Performance
Sequential Read/Write
(CrystalDiskMark)
Read: up to 560 MB/s
Write: up to 500 MB/s
4K Random Read/Write (IOmeter) Read: up to 55,000 IOPS
Write: up to 80,000 IOPS
Mean Time Between Failures
(MTBF)
2,000,000 hour(s)
Drive Writes Per Day (DWPD) 0.3 (3 yrs)
Terabytes Written (TBW) up to 720 TBW
Note Speed may vary due to host hardware, software, usage, and storage
capacity.
The workload used to rate DWPD may be different from your actual
workload, which may vary due to host hardware, software, usage,
and storage capacity.
Terabytes Written (TBW) expresses the endurance under the highest
capacity.
For Mac users please visit our Apple Solutions here.
Warranty
Certificate CE / FCC / BSMI / KC / RCM / UKCA
Warranty Three-year Limited Warranty
Ordering Information
250GB TS250GSSD225S
500GB TS500GSSD225S
1TB TS1TSSD225S
2TB TS2TSSD225S
Product specifications are subject to change without notice. Pictures shown may differ from actual products. Total accessible capacity varies depending on operating environment.