SATA III 6Gb/s SSD SSD420I Datasheet Products Product Description TS1TSSD420I SATA3 SSD, MLC, Wide Temp. TS512GSSD420I TS256GSSD420I Datasheet version TS128GSSD420I 1.2 TS64GSSD420I TS32GSSD420I No.70, Xingzhong Rd., Neihu Dist.,Taipei City 114, Taiwan, R.O.C. Tel:+886-2-2792-8000 Fax:+886-2-2792-1614 www.transcend-info.com Copyright© Transcend Information, Inc. All Rights Reserved.
Revision History Revision No. History Released Date Editor by 1.0 First version (WD 15nm) 2019/12/26 TSD 1.1 Vibration Format Updated Add 2.6 Recommended Measurement Point Revise 5.2.5 PS(Power shield) description 2020/05/25 TSD 1.
Transcend SSD420I Features Part Name Capacity TS1TSSD420I 1TB TS512GSSD420I 512GB TS256GSSD420I 256GB TS128GSSD420I 128GB TS64GSSD420I 64GB TS32GSSD420I 32GB FEATURES UBER DWPD MTBF Data Retention Warranty SATA 6Gbps 2D MLC NAND Flash Wide-temperature operation DDR3 DRAM cache Global wear-leveling function Enhance Bad block management Power shield function BCH ECC function TRIM Command function Advanced Garbage Collection Supports S.M.A.R.T.
Table of Content 1 Introduction……………………..………..………………………….…..……………….…………………………………..5 1.1 General Feature Information………………………………………………………………….……………….5 1.2 Product List……………………………………………..………………………………………………..……………5 1.3 Ordering Information.…………………..…..……………..…………………………………………….………6 2 Product Specifications…………………………………………………….……………..………………………………..7 2.1 Interface and Compliance…..…………………………………………………………………….…….……7 2.2 Drive Capacity……………………….……………..………………………………………………………….…..…7 2.
1. Introduction 1.
1.3 Ordering Information TSXXXGSSD420I 1 2 3 4 1 – Transcend 2 – SSD Density 3 – G: Gigabyte; T: Terabyte 4 – SATA device 5 – 2.
2. Product Specifications 2.1 Interface and Compliance - SATA3, compatible to SATA2 and SATA1 Compatible with ATA/ATAPI-7 Standard Native Command Queuing(NCQ) Command Set RoHS Compliance CE, FCC and BSMI Compliance 2.2 Drive Capacity [Table 1] User Capacity and Addressable Sectors User-Addressable Sectors 32GB 64GB 128GB 62,533,296 125,045,424 250,069,680 Byte per Sector 512 Byte User-Addressable Sectors 256GB 512GB 1TB 500,118,192 1,000,215,216 2,000,409,264 Byte per Sector 512 Byte 2.
2.4 Supply Voltage [Table 4] Supply Voltage Item Requirements 5V 5% Allowable voltage Allowable noise / ripple 100 mV p-p or less 2.5 System Power Consumption [Table 5] Power Consumption Read / Write 32GB 64GB 128GB 256GB 512GB 1TB Active Write (Max.) 170mA 220mA 340mA 490mA 500mA 530mA Active Read (Max.
2.6 Environment Specifications [Table 6] Environment Specification Features Temperature Temperature Gradient Operating1) -40 C to 85 C 60 C/Hr Humidity Non-Operating2) -40 C to 85 C 60 C/Hr 5% to 95%, non-condensing 1500G, duration 0.5 ms, 3 axis3) Shock 20G, 7~2000Hz, 3 axis4) Vibration Note: 1) The operating specification is regarded as Ambient Temperature.
2.7 System Reliability [Table 7] Telcordia SR-332 issue 4 MTBF Specifications Parameter 32GB 64GB 128GB MTBF 256GB 512GB 1TB 512GB 1TB 2,000,000 hours Note: 1) The calculation is based on 25 C. [Table 8] UBER Specifications Parameter 32GB 64GB 128GB 256GB 10-15 UBER Note: 1) Uncorrectable Bit Error Rate (UBER) is a metric for the rate of occurrence of data errors, equal to the number of data errors per bits read as specified in the JESD218 document of JEDEC standard.
[Table 13] Warranty Parameter 32GB 64GB 128GB Warranty 256GB 512GB 1TB 512GB 1TB 3 years limited [Table 14] Regulations Parameter Compliance 32GB 64GB 128GB 256GB CE, FCC and BSMI 11
3. Mechanical Specification The figure below illustrates the Transcend 2.5 inch Solid State Drive. [Table 15] Physical Dimensions and Weight Model Height (mm) Width (mm) Length (mm) Weight (gram) 32GB/64GB/128GB/ 256GB 6.8 0.2 69.85 0.25 100.00 0.
Model 512GB/1TB Height (mm) 6.8 0.2 Width (mm) 69.85 0.25 13 Length (mm) 100.00 0.
4. Pin Assignments 4.1 Serial ATA Interface Connector 4.2 Pin Assignments [Table 16] Pin Assignments Word. Signal Power No.
5. Block Diagram and Function Explanations 5.1 Block Diagram 5.2 Function Explanations 5.2.1 Global Wear Leveling Function Global wear leveling ensures that every block has an even erase count. This helps to extend the life expectancy of an SSD. There are three main processes in global wear leveling: (1) Record the block erase count and save this in the wear-leveling table. (2) Find the static-block and save this in the wear-leveling pointer.
the controller monitors the error bit levels at each read operation. When it reaches the preset threshold value, the controller automatically performs data refresh to “restore” the correct charge levels in the cell. This implementation practically restores the data to its original, error-free state, and hence lengthening data life. 5.2.
They are self-encrypting devices: Data encryption is performed on the device, without the need to pass through the host. The encryption key is also stored on the device (commonly AES is utilized). (1) Features boot authentication: When the user starts the device, the shadow MBR will conduct a pre-boot identification; where the user is cleared, the normal boot process will begin and connections to the devices are to be made.
6. Technology Term Explanations 6.1 TBW Terabytes Written (TBW) directly measures how much you can write cumulatively into the drive over its lifetime. Essentially, it just includes the multiplication conducted above in the measurement itself. For example, if your drive is rated for 365 TBW, that means you can write 365 TB into it before a replacement is required. If its warranty period is 5 years, that works out to 365 TB ÷ (5 years × 365 days/year) = 200 GB of writes per day.
7. Installation Requirements 7.1 SSD Installation Regarding the system assembling, the torque force of mounting screws should not exceed more than 2 Kgf-cm of torque. For SATA cable connection, the cable should not longer than 1 meter and well-connected is necessary to avoid signal transmission error. The standard 2.5 inch SATA interface has a separated connector for power connection. For the connection detail, please refer chapter 4.
8. Command Descriptions 8.1 Support ATA Commands This table and the following paragraphs summarize the ATA command set.
SMART Enable/Disable Autosave B0h Non-data SMART Enable Operations B0h Non-data SMART Execute Off-Line Immediate B0h Non-data SMART Read LOG B0h PIO data-In SMART Read Data B0h PIO data-In SMART Read THRESHOLD B0h PIO data-In SMART Return Status B0h Non-data SMART SAVE ATTRIBUTE VALUES B0h Non-data SMART WRITE LOG B0h PIO data-out Read Native Max Address F8h Non-data Set Max Address F9h Non-data Set Max Set Password F9h PIO data-out Set Max Lock F9h Non-data Set Max Fr
8.
8.3 SMART Attributes The following table shows the vendor specific data in byte 2 to 361 of 512-byte SMART data.
9. Contact Information TAIWAN JAPAN No.70, XingZhong Rd., NeiHu Dist., Taipei, Taiwan, R.O.C TEL +886-2-2792-8000 Fax +886-2-2793-2222 E-mail: sales-tw@transcend-info.com E-mail: sales-jp@transcend-info.com TEL: +81-3-5820-6000 KOREA E-mail: sales-kr@transcend-info.com TEL: +82-2-782-8088 Shanghai GERMANY E-mail: sales-cn@transcendchina.com TEL: +86-21-6161-9388 E-mail: sales-de@transcend-info.com TEL: +49-40-538-907-0 Beijing NETHERLANDS E-mail: sales-cn@transcendchina.
