Data Sheet

8
2.4 Supply Voltage
[Table 4] Supply Voltage
Item Requirements
Allowable voltage
3.3V

5%
Allowable noise / ripple 100 mV p-p or less
2.5 System Power Consumption
[Table 5] Power Consumption
Read / Write 64GB 128GB 256GB 512GB 1TB
Active Write (Max.)
1)
1.8W 2.0W 2.1W 2.3W 2.4W
Active Read (Max.)
1)
1.5W 1.6W 1.7W 1.9W 2.2W
Idle 0.4W 0.4W 0.4W 0.4W 0.4W
DEVSLP 5mW
Note:
1) The power consumption is measured under SSD operation at maximum performance. The value is affected by system
operation performance and workload.
2.6 Environment Specifications
[Table 6] Environment Specification
Features Operating
1)
Non-Operating
2)
Temperature
-40C to 85C -40C to 85C
Temperature Gradient
60

C/Hr 60

C/Hr
Humidity 5% to 95%, non-condensing
Shock 1500G, duration 0.5 ms, 3 axis
3)
Vibration 20G, 7~2000Hz, 3 axis
4)
Note:
1) The operating specification is regarded as Ambient Temperature. Standard grade (0°C to +70°C) and Industrial grade (-40°C to
+85°C) indicate the temperature conditions for testing devices on programmable temperature and humidity chamber room.
2) The non-operating specification is regarded as storage specification.
3) Refer IEC 68-2-27 standard.
4) Refer IEC 68-2-6 standard.
Recommended Measurement Point
Recommended temperature measurement point is in the center of the connector inserted by the device. Sufficient airflow is
recommended for proper operation on heavier workloads within the device operating temperature.