Transcend Multi-Card Reader User’s Manual
Table of Contents Introduction ............................................................................................ 1 Features.............................................................................................................................................1 System Requirements........................................................................................................................1 Safety.......................................................................................
Thank you for purchasing Transcend’s Multi-Card Reader, a small device specifically designed for fast, easy data transfer and exchange using many different types of Memory Cards and without the need for an adapter. Transcend’s Multi-Card Reader plugs into the USB port on your Desktop, or Notebook computer and accepts the direct input of the most popular Memory Cards (see “Specifications” for details) .
Safety Precautions General Use Carefully unpack the contents of the Multi-Card Reader package. Do not allow your Multi-Card Reader to become damp or wet from water or any other liquids. Do not use a damp/wet cloth to wipe or clean the exterior case.
Driver Installation Driver Installation for Windows® 98/98SE, 2000 (SP1 and SP2) Use with a Computer 1. Put the Driver CD into the CD-ROM (Auto-Run supported). Click on the “Driver Installation” button. Figure 1. Windows 98/98SE/2000 (SP1 & SP2) Driver Installation 2. The InstallShield Wizard will guide you through the installation process. Follow the on-screen instructions to complete the driver installation. Figure 2.
3. After the drivers are installed onto the computer, plug the Multi-Card Reader into an available USB Figure 3. Found New Hardware 4. The computer will automatically detect the Multi-Card Reader and a number of Removable Disk* drives with newly assigned drive letters representing the readers’ card slots will appear in the My Computer window. Figure 4.
Driver Installation for Mac™ OS 9.x 1. Put the Driver CD into the CD-ROM drive and run the Install program located in the Mac folder on the Driver CD. Follow the on-screen instructions to complete the driver installation. 2. Plug the Multi-Card Reader into an available USB port. 3. Insert a memory card into the Multi-Card Reader. A disk icon will appear on the desktop. After the icon Figure 5. Mac Driver Installation Driver Installation for Mac™ OS 10.1.2, or Later No drivers are required.
Connecting to a Computer If your Multi-Card Reader is connected to a computer using a Mini USB (on the Reader) to USB A-Type (on a Desktop/Notebook) cable. Please ensure that you connect the cable ends to the ports correctly. 1. If your Multi-Card Reader came with a Mini USB to USB A-Type cable, use it to plug the Multi-Card Use with a Computer Reader into an available USB port on your desktop, or notebook computer. Figure 7. Connecting to a Computer 2.
Disconnecting from a Computer NEVER disconnect the Multi-Card Reader from a computer when the Multi-Card Reader is in the READ/WRITE status, or your data may be damaged. Removing the Multi-Card Reader in Windows® 98/98SE Unplug your Multi-Card Reader from your system directly when data is not transferring. Removing the Multi-Card Reader in Windows® Me, 2000 and XP icon on the system tray. 2. The Safely Remove Hardware pop-up window will appear. Select it to continue. Figure 8. Safely Remove Hardware 3.
Troubleshooting If a problem occurs with your Multi-Card Reader, please first check the information listed below before taking your Multi-Card Reader for repair. If you are unable to remedy a problem from the following hints, please consult your dealer, service center, or local Transcend branch office. We also have FAQ and Support services on our websites. Driver CD cannot auto-run in Windows® Go to the Device Manager in the Control Panel and enable the Auto-Insert function for the CD-ROM drive.
Multi-Card Reader M1 Specifications • Size (L x W x H): 64 mm × 33 mm × 12 mm • Weight: 20g • Max.
Portable Multi-Card Reader Specifications • Size (L x W x H): 70 mm × 70 mm × 15 mm • Weight: 45g • Max.
Compact Card Reader Specifications • Size (L x W x H): 70.6 mm × 40.6 mm × 12.9 mm • Weight: 20g • Max.
Compact Card Reader S1 Specifications • Size (L x W x H): 69 mm × 35 mm × 15 mm • Weight: 20g • Max.
Transcend Limited Warranty “Above and Beyond” is the standard we set ourselves for customer service at Transcend. We consistently position ourselves to be significantly above the industry norm, which is all part of our commitment to Customer Satisfaction. All Transcend information, Inc. (Transcend) products are warranted and tested to be free from defects in material and workmanship and to conform to the published specifications.
Terminology adapter.........................................................................................................................................................3 Device that is used to connect one hardware device to another without a loss in function. CD-ROM .............................................................................................................................................
