Instructions

G-Sensor: Adjust the sensitivity of the G-Sensor.

Available options: Disable / Low (default) / Medium / High

Speed Unit: Set the measurement unit of speed.

Available options: km/h (default) / mph

Lane Departure: Alert the driver when the vehicle veers out of a lane. This function is

activated when the driving speed exceeds the value set ahead.

Available options: Disable (default) / >60 km/h ~ 150 km/h (40 mph~85 mph)

Forward Collision: Alert the driver when the vehicle is getting too close to the car ahead.

This function is activated when the driving speed exceeds the value set ahead.

Available options: Disable (default) / 60 kmh ~150 kmh (40 mph~85 mph)

Speed Alarm: Alert the driver with warning beeps if the driving speed exceeds the value

set ahead.

Available options: Disable (default) / 60 kmh (40 mph) / ... / 150 kmh (85 mph)

Parking Mode: Determine if continuous recording is necessary according to motion

detection after the car engine is switched off (this mode will drain DrivePro’s battery).

Available options: Enable / Disable (default)

Delay Power Off: Schedule the DrivePro to shut down at a certain time.

Available options: Disable / 10 secs (default) / 30 secs

Auto Display Off: Set duration for display to automatically turn off after recording begins.

Available options: Never (default) / After 1 min / After 3 mins

Note: Auto Display Off is disabled when Speed Alarm, Forward Collision, Lane Departure,

Headlight Reminder, Driver Fatigue Alert, or Head-Up Display is enabled.

GPS Status: Display the number of GPS satellites received and GPS signal intensity.

Navigation System: Select a navigation system according to your preference.

Available options: GPS (default) / GLONASS

Headlight Reminder: When the DrivePro detects poor lighting conditions, the headlight

reminder will automatically activate.

Available options: Disable (default) / Enable

Driver Fatigue Alert: Remind the driver of the need to rest after driving for a preset,

driver-determined period of time.