User’s Manual Dashcam DrivePro™ 550 2020/05 (Version 1.
Table of Contents 1. 2. 3. 4. Introduction ...................................................................................... 3 System Requirements ...................................................................... 4 Package Contents ............................................................................ 5 Getting Started ................................................................................. 6 4-1 Overview .............................................................................
20. Eurasian Conformity Mark (EAC) .....................................................
1. Introduction Transcend’s DriveProTM 550 Dashcam is an advanced dual-lens in-car recorder that is specifically designed to capture real time videos and photos of events happening outside and inside your vehicle. The DrivePro 550’s front lens integrates a Sony sensor, a wide 160° angle lens, and a ƒ/2.2 aperture to record images in crystal clear Full HD 1080P (30 FPS).
2. System Requirements System requirements for connecting the DrivePro to a desktop or a laptop with a working USB port: Windows® 7 Windows® 8 Windows® 8.1 Windows® 10 Mac® OS X 10.8.2 or later Linux® Kernel 2.6.38 or later System requirements for using the DrivePro Toolbox: Windows® 7 Windows® 8 Windows® 8.1 Windows® 10 Mac® OS 10.
3.
4. Getting Started 4-1 Overview Mounting Socket Microphone Front Lens Speaker 2.
4-2 Inserting a microSD Memory Card You must insert a microSD memory card into the DrivePro before you can start recording. Please use a microSD memory card with 8GB to 128GB capacity (Class 10 or above). 1. Insert a microSD memory card into the appropriate card slot on the bottom of the DrivePro. Note: Always format new memory cards in the DrivePro before using them for the first time. To format a new memory card, press the Settings button during recording, and select Format Card.
2. To remove, push to eject the memory card out of the slot. WARNING: Do not remove the memory card during shutdown to avoid damages to the memory card and loss of recorded videos. 4-3 Mounting the DrivePro 1. Insert the mounting bracket into the top of the DrivePro, and slide sideways until you hear a click. 2. Thoroughly clean and dry the area of the windshield you wish to mount the DrivePro.
4. Turn the adjustment knob anticlockwise to loosen, and then adjust the DrivePro’s position. 5. After the DrivePro is in the best position, turn the adjustment knob clockwise to make sure that the DrivePro is securely locked in place.
4-4 Connecting to Power Note: Insert a microSD memory card before connecting the DrivePro to your car’s lighter socket. 1. Connect the small end of the car adapter to the USB connector of the DrivePro. 2. Plug the other end of the car adapter in your car’s lighter socket. 3. After the car engine is switched on, the DrivePro will automatically turn on and start recording. Note: To use for the first time, please set the date, time and time zone.
4-5 Function Buttons Mode Video Recording Power / Wi-Fi* Browse Files Settings Snapshot Back Up Down OK Browse/Settings / Video Playback Back Play/Pause Protected/Unprotected Delete Back* Up Down Delete View Photos Long press the Long press the Long press the button to quickly enter Time-Lapse Video menu. Wi-Fi connection is only available when the DrivePro is connected to power. button to manually turn on/off the DrivePro in any mode.
4-7 Setting the Date, Time and Time Zone To set the current date and time: 1. During video recording, press the Settings button 2. Use / to select Date/Time and press . . 3. Use / to adjust values, and press to move to the next block. 4. Repeat Step 3 to set up the date/time format and time zone. Press after finishing the settings.
5. Recording Videos 5-1 Normal Recording After the car engine is switched on, the DrivePro will automatically turn on and start recording. By default, one video file is saved for every 3 minutes of recording. To adjust the recording length, please refer to the Settings section in this manual. After the car engine is switched off, the DrivePro will automatically save the current recording and power off.
A warning will appear on the screen when the emergency recording is being activated. G-Sensor Event Recording: During video recording, the DrivePro will automatically activate Emergency Recording mode when detecting a collision. If the G-Sensor sensitivity is set to “High”, even minor shocks will activate Emergency Recording mode. If the G-Sensor sensitivity is set to “Low”, only significant shocks will activate Emergency Recording mode.
Low Battery Please charge the DrivePro immediately after viewing the Low Battery warning to avoid errors happening to the system time. Please avoid using the built-in battery to record videos directly. Note: 1. If you want to record by the built-in battery, please make sure that it has sufficient power supply. 2. It takes at least 4.5 hours to charge the battery from low to full by an AC/DC adapter (Output: DC 4.6~5.25V 2A). 6. Playing Videos and Browsing Photos 6-1 Playing Videos / Browsing Photos 1.
3. Use / 4. Press to select the desired file, and press to preview to return to the video file list. 6-2 Deleting Videos/Photos 1. Press 2. Use to delete video/photo files. / to cancel or confirm the deletion of the video/photo file, and press 16 .
6-3 Protecting Videos 1. Press 2. Use to protect the video file. / to select the desired option and press . 7. Settings In the Settings menu, you can adjust settings of video resolution, recording time and G-Sensor sensitivity. You can also set the date/time, change the interface language, format the memory card, and upgrade firmwares etc. 1. Press the Settings button .
2. Use / to select the menu and press 3. Use / to select the desired setting, and press 4. Press to return to the Settings menu. 18 . .
Menu Options Resolution: Set the resolution/quality for video recording (front lens+rear lens). Available options: 1080P+720P (default) / 720P+720P Exposure Value: Adjust exposure composition value to lighten or darken the preview screen. Available options: +0.5 +1.0 +1.5 +2.0 / 0 / -0.5 / -1.0 / -1.5 / -2.0 Video Length: Set the recording length of each recorded video file. Available options: 1 min / 3 mins (default) / 5 mins Display: Display both lenses or the front / rear lens only.
G-Sensor: Adjust the sensitivity of the G-Sensor. Available options: Disable / Low (default) / Medium / High Speed Unit: Set the measurement unit of speed. Available options: km/h (default) / mph Lane Departure: Alert the driver when the vehicle veers out of a lane. This function is activated when the driving speed exceeds the value set ahead. Available options: Disable (default) / >60 km/h ~ 150 km/h (40 mph~85 mph) Forward Collision: Alert the driver when the vehicle is getting too close to the car ahead.
Available options: Disable (default) / 1 hour / 2 hours / 3 hours / 4 hours Date/Time: Set the current date, time, format and time zone. Language: Set the on-screen display menu language Available options: English / 繁體中文 / 简体中文 / 日本語 / Deutsch / Españ ol / Français / Italiano / Русский / Português / Ελληνικά / Tü rkçe / 한국어 / ไทย Format Card: Format the microSD memory card. Available options: No / Yes WARNING: Formatting will erase all the data stored in the card.
WARNING: NEVER remove the power cord or the microSD memory card while the firmware is being upgraded. If the DrivePro cannot be turned on due to firmware upgrade failure, please contact Transcend customer service for technical support. Information: Display the DrivePro’s current firmware version, card capacity and free space.
8. Using the DrivePro App Developed specifically for iOS and Android devices, the free download DrivePro App allows you to wirelessly live stream real-time video footages while recording, adjust DrivePro settings, and play videos directly from your mobile devices. 8-1 Downloading and Installing the App 1. Search “DrivePro” on your App Store or Google Play. 2. Download and install the DrivePro App. Once the installation is completed, the App will be displayed on the home screen of your device.
7. The image above will be displayed when you are connecting to the DrivePro. Note: To change the default SSID and the password, go to Settings in the DrivePro App. 9. DrivePro™ Toolbox Software The DrivePro Toolbox features a user-friendly interface that allows you to select and play videos recorded on your DrivePro, and see your driving paths of the recorded videos displayed on maps without the need to install separate codecs. 1. Download the installation files from: www.transcend-info.com/downloads 2.
10. Transferring Files to a Computer To transfer files between the DrivePro’s memory card and your computer: Option 1: Take the microSD memory card out of the DrivePro, and insert to a compatible card reader to transfer files to your computer. Option 2: 1. Insert the microSD memory card into the DrivePro. 2. Plug the small end of a USB cable into the Mini-B USB port located on the right-hand side of the DrivePro. 3. Plug the large end of the cable into an available USB port on your desktop or laptop.
*Note: (E:) is an example drive letter – the letter in your “My Computer” window may differ. Your DrivePro is now ready to transfer data just like an external hard drive. To transfer videos, simply drag-and-drop files from the folder that represents the DrivePro. Proper removal of your DrivePro from Windows: 1. Click once on the Removable Hardware icon 2. A Safely Remove Hardware window will pop up. Click to continue. 3. Unplug your DrivePro from the USB port. in the system tray. Mac® OS X 10.8.
11. Safety Cautions These usage and safety guidelines are IMPORTANT! Please follow them carefully to ensure your own personal safety, and help protect your DrivePro from potential damages. General Use For in-car use only. For your safety, do not operate the DrivePro, or use the DrivePro App while driving. Avoid placing the DrivePro in an extreme temperature environment. Avoid splashing water or any other liquids on the DrivePro and accessories.
12. Troubleshooting If a problem occurs to your DrivePro, please first check the instructions listed below before sending your DrivePro for repair. If you cannot find any ideal solution to your question below, please consult your dealer, service center, or local Transcend branch office for further help. You can also visit Transcend website for FAQ and Technical Support services. For any Hardware issues, please refer to the DrivePro User’s Manual.
13. Specifications Display Type & Size 2.4" color LCD Connect Interface: USB 2.0 Storage Capacity: microSD, 8GB / 16GB / 32GB / 64GB /128GB (Class 10 or above) Dimensions: 96.2 mm (L) × 64.5mm (W)× 43.9 mm (H) 3.79” (L) x 2.54” (W) x 1.73” (H) Weight: 107g 3.77 oz Battery Li-Polymer Power Supply Input: DC 12V~28V Output: DC 4.6~5.25V 2A Operating Temperature: -20°C (-4°F) ~ 65°C (149°F) Video Format: H.264 (MP4: up to 1920x1080P 30fps) Front: F/2.2, 160° wide angle Lens: Rear: F/2.
14. EU Compliance Statement Transcend Information hereby declares that all CE marked Transcend products incorporating radio equipment functionality are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.transcend-info.com/eu_compliance Dashcam / Body Camera series Frequency: Maximum transmit power: 2400-2483.5MHz < 100mW DrivePro Body 60 Frequency: Maximum transmit power: 2400-2483.
15. Recycling and Environmental Protection Recycling the Product (WEEE): Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means that the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products.
16. Federal Communications Commission (FCC) Statement This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received including interference that may cause undesired operation. This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
17. Two-year Limited Warranty This product is covered by a Two-year Limited Warranty. Should your product fail under normal use within two years from the original purchase date, Transcend will provide warranty service pursuant to the terms of the Transcend Warranty Policy. Proof of the original purchase date is required for warranty service. Transcend will inspect the product and in its sole discretion repair or replace it with a refurbished product or functional equivalent.
18. GNU General Public License (GPL) Disclosure Firmware incorporated into this product and/or software used for this product may include third party copyrighted software licensed under the GPL (hereinafter referred to as “GPL Software”).
5. Copying. Customer may not copy the Licensed Software except that one copy of any separate software component of the Licensed Software may be made to the extent that such copying is necessary for Customer's own backup purposes. 6. Open Source. The Licensed Software may contain open source components licensed to Transcend pursuant to the license terms specified as below, (a) GNU General Public License (GPL), the terms of which is currently available at http://www.gnu.org/licenses/gpl.
10. Miscellaneous. (a) This Agreement constitutes the entire agreement between Transcend and Customer concerning the subject matter hereof, and it may only be modified by a written amendment signed by an authorized executive of Transcend. (b) Except to the extent applicable law, if any, provides otherwise, this Agreement will be governed by the law of the Republic of China, excluding its conflict of law provisions.
