User Manual

6
4-2 Inserting a microSD Memory Card
You must insert a microSD memory card into the DrivePro before you can start recording. Please
use a microSD memory card with 8GB to 128GB capacity (Class 10 or above).
1. Insert a microSD memory card into the appropriate card slot on the bottom of the DrivePro.
Note: Always format new memory cards in the DrivePro before using them for the first time.
To format a new memory card, press the Settings button during recording, and select
Format Card.
Format your memory card on a regular basis. For the best recording stability, you are
encouraged to format the microSD card regularly. DrivePro™ will send you a notification
every three months as a reminder. Upon receipt, press to begin formatting
immediately; press to resume without taking actions. Notice: Formatting will erase
all data on the memory card.
WARNING:
1. DrivePro 550 supports the FAT32 and exFAT file formats, but not NTFS.
2. Make sure the allocation Unit Size of the microSD card is 32 KB or larger; if not, the
DrivePro will format the card before recording.
 The following table shows approximate recording time according to capacity and resolution
(for reference only):
Card Capacity
(FAT32)
1080P + 720P
720P + 720P
8GB
0 hr 50 min
1 hr 25 min
16GB
1 hr 40 min
2 hr 50 min
32GB
3 hr 20 min
5 hr 40 min
64GB
6 hr 40 min
11 hr 20 min
128GB
13 hr 20 min
22 hr 40 min
2. To remove, push to eject the memory card out of the slot.