User's Manual

Record using the Built-In Microphone

1. Unless otherwise selected, Pressing and Holding the “RECORD” button for more than 2

seconds in any mode except the RADIO Mode will begin an audio recording using the T.sonic

™

820’s

Built-in Microphone.

2. A Recording file is generated and will appear on the screen; this file is saved in the RECORD Mode in

the [/MICIN.DIR/] folder.

3. Files Recorded using the Built-in Microphone are named in the order [Month/DayM001.WAV], then

[Month/DayM002.WAV] and so forth.

4. Pressing the “PLAY/PAUSE” button

during a recording will Pause the recording, pressing the

“PLAY/PAUSE” button

again will resume the recording.

5. Press the “RECORD” button

for more than 2 seconds during a recording to stop the recording

and the screen will return to the RECORD Mode.

6. Recorded audio files can be accessed in the RECORD Mode, or by using the File Navigator.

Sample rate Channels 2GB 4GB

Low (8KHz) 1 (mono) 128 hrs 256 hrs

Med (16KHz) 1 (mono) 64 hrs 128 hrs

Record Sound

High (32KHz) 1 (mono) 32 hrs 64 hrs

 If not enough memory space is available, or the battery power is too low, the T.sonic

™

820 cannot

support the maximum recording capacity as outlined in the above table.

 The closer you move the T.sonic

™

820’s Microphone to the source of the sound the higher the quality

of the recording.

RECORD Functions